Using acoustic emission parameters to study damage and fracture characteristics of concrete with different pour intervals cold joints

Huang-Shi Deng,He-Lin Fu,Yi-Bo Zhao,Yue Shi,Xianquan Huang

DOI: https://doi.org/10.1016/j.tafmec.2022.103601

IF: 4.374

2022-12-01

Theoretical and Applied Fracture Mechanics

Abstract:Discontinuous pouring of concrete members leads to the formation of cold joints, thus increasing the risk of structural cracking. In this study, a three-point bending test was performed to determine the fracture toughness of concrete members, and the process of fracture formation in the sample was monitored by using acoustic emission (AE) technology. Based on the AE signal, the damage and fracture characteristics of concrete members with different pouring intervals cold joints were analyzed. Results implied that when the pouring interval exceeded the initial and final setting times of concrete, the ultimate load-bearing capacity of the structure decreased by 20% and 50%, respectively; thus, the formation of cold joints led to a significant decrease in bearing capacity. AE amplitude, AE energy and AE count reflected the decrease in the bearing capacity of the specimen; however, using these parameters led to errors in the quantitative evaluation of the decrease in the bearing capacity. The energy curve of components with a long pour interval decreases faster after peak load than those with a short pour interval. The formation of microcracks was evaluated based on the spatial distribution of AE events, which was discrete when the pouring interval was less than the initial setting time, and the AE events were concentrated near the cold joints when the pouring interval exceeded the initial setting time. With an increase in the pouring interval, the softening segment of the loading curve gradually degenerated, and differences in the loading curve was caused by the location of the microcracks. The relative strengths of the cold joints and the aggregate–mortar interface determined the position of the microcracks. The conclusions of this study can provide support for on-site detection and risk prediction of concrete with cold joints.

engineering, mechanical,mechanics