Abstract:Abstract: The most prevalent and widely used building material in the world is reinforced concrete. The primary building material for the majority of constructions, including buildings, bridges, etc., is reinforced concrete. Because of various factors, some of these buildings or portions of them are failing to perform as designed. The best solution to increase the load carrying capacity and extend the useful life of these inadequate structures is to strengthen them because replacing them would need significant investments and not be an appealing alternative. Even though the effectiveness of other techniques is widely accepted,a new effective and promising technique of strengthening civil engineering structures externally is gaining popularity, where fibre-reinforced polymer (FRP) is used. One of the most popular strengthening methods recently is the use of carbon fibre reinforced polymer (CFRP) to strengthen reinforced concrete beams. It provides a desirable way to improve the shear and flexural strengths of RC beams. The manner in which these composites are bonded to the beam has a significant impact on the behaviour of reinforced concrete beams in shear and flexure. The purpose of this study was to present a three-dimensional nonlinear finite element analysis (FEA) of a reinforced concrete beam (RC beam) reinforced by prestressed carbon fibre plate (CFRP plate). While there are many commercial programmes available for three-dimensional nonlinear FEA, each one has a unique ability to represent complex behaviour of composite materials, such as RC beams strengthened with prestressed CFRP plate and the contact interaction. Because of its reputation for accuracy in simulating the behaviour of a range of materials, including concrete, and its potent contact algorithms, the ABAQUS finite element programme was chosen for this work. Steel reinforcements were modelled as elastic- perfectly plastic materials, while concrete was studied using the concrete damage plasticity (CDP) constitutive model. The CFRP plate was modelled as an entirely elastic substance that breaks under the highest tensile strain. Concrete and steel reinforcement were considered to have a perfect connection, and the behaviour of concrete and CFRP plate was represented using a contact model. The FEA's findings were verified against experiment findings that were published in the literature. In terms of load-deflection behaviour, crack patterns, and mode of failure, the results were compared. The proposed FEA model was able to accurately simulate the behaviour of RC beams strengthened with prestressed CFRP plate based on the validation. To find out the impact of the thickness, width, and length of the CFRP plate, as well as the prestressing levels and steel grades, a parametric research was done. In particular, the strength of the RC beam for the ultimate load was shown to be increased by increasing prestressing of the CFRP plate. However, as prestressing increased, the fracture of the CFRP plate altered the mechanism of failure, preventing the ultimate load from increasing further. The use of higher grade steel improved the ability to support additional weight. Although the general load carrying capability of the CFRP plate was increased by lengthening the plate, it was discovered that strengthening RC beams by 25% of their shear span was sufficient and cost- effective. The load-deflection curve, failure modes, and crack patterns from the experiments are fairly reflected in the FE model.

Hygrothermal effect of bio-inspired helicoid laminate plate for strengthening damaged RC beam

Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Experimental and Numerical Study of CFRP Laminate Strengthened Concrete Beams Under Hygrothermal Environment

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Shear Strengthening of RC Beams Using Fabric-Reinforced Cementitious Matrix, Carbon Plates, and 3D-Printed Strips

Shear strengthening of reinforced concrete beams using prefabricated ultra‐high performance fiber reinforced concrete plates: Experimental and numerical investigation

Experimental and numerical investigations about textile-reinforced concrete and hybrid solutions for repairing and/or strengthening reinforced concrete beams

An insight into the buckling behavior of double- and cross-helicoidal laminated composite plates inspired by dactyl's club

Impact of Internal CFRP strips on the flexural behavior of heat-damaged reinforced concrete beams

Strategies for strengthening of corroded reinforced concrete beams using CFRP laminates and UHPC jacketing

Shear behavior of pre-damaged RC beams strengthened with steel plate and UHPC

Shear behavior of RC beams strengthened with ultra-high-performance fiber-reinforced concrete using finite-element analysis

Study on reinforced concrete beams strengthened using shape memory alloy wires in combination with carbon-fiber-reinforced polymer plates

Ability of pre-cast strain-hardening cementitious composite plates to enhance the shear performance of RC haunched beams

Shear Improvement of Defected RC Beams with Sustainable Aluminum Boxes Incorporating High Performance Concretes

Flexural and shear strengthening of RC beams reinforced with externally bonded CFRP laminates postfire exposure by experimental and analytical investigations

Innovative hybrid bonding method for strengthening reinforced concrete beam in flexure

Valorization of the use of natural Alfa (Stipa tenacissima L.) fiber in composite reinforcing plates based on natural fibers and metal fabric

Experimental Study and Numerical Modelling on Flexural and Shear Strengthening of RC Beam with Prestressed FRP Bars

Hybrid CFRP‐GFRP sheets for flexural strengthening of continuous RC beams: Experimentation and analytical modeling