Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

Air-Coupled Broadband Impact-Echo Actuation Using Supersonic Jet Flow

Numerical Simulation of the Performance of the Sc-89 Jet Impact System

Acoustic emission detection and CFD simulation of a liquid spray process

Fluidic Ultrasound Generation for Non‐Destructive Testing

Passive acoustic imaging for jet bubbles

Experimental study on acoustic resonance of subsonic and slightly underexpanded impinging jets

Multiphysics Modeling of a Synthetic Jet Actuator in Operation

A new approach of acoustic characteristics analysis in jet-bubble noise

Enhanced air-coupled impact echo technique by phase analysis of signals from multiple sensors

The thermoacoustic effect and its application in air-coupled testing of composite structures

3D flow simulations and pressure measurements for the evaluation of cavitation dynamics and flow aggressiveness in ultrasonic erosion devices with varying gap widths

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound

An immersed boundary method for fluid--structure--acoustics interactions involving large deformations and complex geometries

Explaining impact echo geometry effects using modal analysis theory and numerical simulations

Novel Bulk Acoustic Wave Hammer to Determinate the Dynamic Response of Microstructures Using Pulsed Broad Bandwidth Ultrasonic Transducers

Acoustic emission monitoring in geotechnical element tests

Air-coupled ultrasound using broadband shock waves from piezoelectric spark igniters

Large Eddy Simulations of Supersonic Jet Flows for Aeroacoustic Applications

A Proposed Non-Destructive Method Based on Sphere Launching and Piezoelectric Diaphragm

Unstructured LES of the Baseline EXEJET Dual-Stream Jet

Detached-eddy Simulation of Flow Past a Pitching NACA 0015 Airfoil with Pulsed Actuation