Abstract:The EXEJET project is a large-scale jet noise collaborative program by Snecma, Onera and Airbus. In this framework, an exhaustive experimental database has been collected on a realistic dual-jet stream mounted around a central plug. The high-bypass ratio jet is operated at approach conditions in the CEPRA19 anechoic wind-tunnel. In the present paper, several Large-Eddy Simulations (LES) have been performed on the EXEJET baseline configuration using the unstructured flow solver AVBP developped at Cerfacs. The nozzle inlet boundary conditions are obtained by performing RANS simulations until the nozzle exit total pressure conditions match the experimental pressure probe survey. Three LES simulations have been performed following the numerical strategy developped by the present authors, the first one with a fully tetrahedral mesh, the second one uses a hybrid mesh including prismatic layers to better resolve the boundary layer development in the nozzles and finally, a finer mesh including an original tripping method near the fan jet exit to trigger the laminar to turbulent transition of the external mixing layer. The boundary layers developping in the nozzles have a major influence on the turbulent jet streams mixing. The mean velocity magnitude and turbulent kinetic energy evolution along the jet from the PIV measurements are well captured with the three simulations but a better agreement is obtained with the finer hybrid tripped simulation. The acoustic predictions obtained using a Ffowcs William and Hawking’s analogy are in good agreement with the experimental measurements especially at 30◦ degree in the downstream direction. The successive meshes tested bring similar acoustic results in the low and middle frequency ranges. The hybrid meshes recover the proper high-frequency decay of the sound levels and the cut-off frequency is increased with the mesh refeinement. Preliminary beamforming results have identified two main noise sources upstream and downstream the core-jet collapse.

Unstructured LES of the Baseline EXEJET Dual-Stream Jet

Hydrodynamics and Local Turbulent Mixing of Submerged, Parallel Liquid Jets: Experiments and CFD Simulations

Les and Cdns Investigation of T106c Low Pressure Turbine

Large Eddy Simulations of Supersonic Jet Flows for Aeroacoustic Applications

Large Eddy Simulation for Jets from Chevron and Dual Flow Nozzles

Influence of Different Subgrid Scale Models in LES of Supersonic Jet Flows

Nektar++: Development of the Compressible Flow Solver for Jet Aeroacoustics

Experiments with rectangular supersonic jets with potential noise reduction technology

Importance of the nozzle-exit boundary-layer state in subsonic turbulent jets

Direct-Noise of an Ultrahigh-Bypass-Ratio Turbofan: Periodic-Sector vs Full-Annulas Large-Eddy Simulations

Efficient and affordable high order, high fidelity Large Eddy Simulations for industrial level applications

Near-Field Wall-Modeled Large-Eddy Simulation of the NASA X-59 Low-Boom Flight Demonstrator

Numerical Simulation of the Micro-Jet Velocity and Cavitation-Erosion on an Axisymmetric Nozzle

Jet noise of a low bypass turbofan with internal mixing and external plug

Study on the Resolution of Large-Eddy Simulations for Supersonic Jet Flows

Large-Eddy Simulations of a Single-Species Solid Rocket Booster Jet

Large Eddy Simulation of Rectangular Jets

Supersonic Jet Excitation using Flapping Injection

Characterization of pressure fluctuations within a controlled-diffusion blade boundary layer using the equilibrium wall-modelled LES

Resolvent-based modeling of turbulent jet noise

Investigation of vortical and near-acoustic fields in three-stream jets