Abstract:The EXEJET project is a large-scale jet noise collaborative program by Snecma, Onera and Airbus. In this framework, an exhaustive experimental database has been collected on a realistic dual-jet stream mounted around a central plug. The high-bypass ratio jet is operated at approach conditions in the CEPRA19 anechoic wind-tunnel. In the present paper, several Large-Eddy Simulations (LES) have been performed on the EXEJET baseline configuration using the unstructured flow solver AVBP developped at Cerfacs. The nozzle inlet boundary conditions are obtained by performing RANS simulations until the nozzle exit total pressure conditions match the experimental pressure probe survey. Three LES simulations have been performed following the numerical strategy developped by the present authors, the first one with a fully tetrahedral mesh, the second one uses a hybrid mesh including prismatic layers to better resolve the boundary layer development in the nozzles and finally, a finer mesh including an original tripping method near the fan jet exit to trigger the laminar to turbulent transition of the external mixing layer. The boundary layers developping in the nozzles have a major influence on the turbulent jet streams mixing. The mean velocity magnitude and turbulent kinetic energy evolution along the jet from the PIV measurements are well captured with the three simulations but a better agreement is obtained with the finer hybrid tripped simulation. The acoustic predictions obtained using a Ffowcs William and Hawking’s analogy are in good agreement with the experimental measurements especially at 30◦ degree in the downstream direction. The successive meshes tested bring similar acoustic results in the low and middle frequency ranges. The hybrid meshes recover the proper high-frequency decay of the sound levels and the cut-off frequency is increased with the mesh refeinement. Preliminary beamforming results have identified two main noise sources upstream and downstream the core-jet collapse.

Large Eddy Simulation for Jets from Chevron and Dual Flow Nozzles

Constrained Large-Eddy Simulation for Aerodynamics

Large Eddy Simulations of Supersonic Jet Flows for Aeroacoustic Applications

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Efficient and affordable high order, high fidelity Large Eddy Simulations for industrial level applications

Influence of Different Subgrid Scale Models in LES of Supersonic Jet Flows

Unstructured LES of the Baseline EXEJET Dual-Stream Jet

Large-eddy Simulation of Underexpanded Sonic Coaxial Jet

Large Eddy Simulation of Turbulent Flows Passage of Reversible Runner

Numerical study of high speed jets in crossflow

Numerical Simulation of the Formation of Nanoparticles in an Impinging Twin-Jet

Numerical study of flow and noise predictions for tandem cylinders using incompressible improved delayed detached eddy simulation combined with acoustic perturbation equations

Large/small eddy simulations: A high-fidelity method for studying high-Reynolds number turbulent flows

Application of Large Eddy Simulation to an Oscillating Flow Past A Circular Cylinder

Toward large eddy simulation of shear-thinning liquid jets: A priori analysis of subgrid scale closures for multiphase flows

Study on the Resolution of Large-Eddy Simulations for Supersonic Jet Flows

Far Field Noise Prediction Of Subsonic Hot And Cold Jets Using Large-Eddy Simulation

LARGE EDDY SIMULATION OF AN ELLIPTIC JET INJECTED INTO A SUPERSONIC CROSSFLOW

Large Eddy Simulations for 3D Turbine Blades Using a High Order Flux Reconstruction Method

Large Eddy Simulation of Cavitation Jets from an Organ-Pipe Nozzle: The Influence of Cavitation on the Vortex Coherent Structure

Large Eddy Simulation of Planar Free Jet Flow Using the Space-Time Conservation Element/Solution Element Scheme