Near-Field Wall-Modeled Large-Eddy Simulation of the NASA X-59 Low-Boom Flight Demonstrator

Emily Williams,Gonzalo Arranz,Adrián Lozano-Durán

2023-07-06

Abstract:Wall-modeled large-eddy simulation (WMLES) is utilized to analyze the experimental aircraft X-59 Quiet SuperSonic Technology (QueSST) developed by Lockheed Martin at Skunk Works for NASA's Low-Boom Flight Demonstrator project. The simulations utilize the charLES solver and aim to assess the ability of WMLES to predict near-field noise levels under cruise conditions, considering various subgrid-scale (SGS) models and grid resolutions. The results are compared with previous numerical studies based on the Reynolds-averaged Navier-Stokes (RANS) equations. Our findings demonstrate that WMLES produces near-field pressure predictions that are similar to those of RANS simulations at a comparable computational cost. Some mild discrepancies are observed between the WMLES and RANS predictions downstream the aircraft. These differences persist for finest grid refinement considered, suggesting that they might be attributed to underresolved interactions of shock waves and expansions waves at the trailing edge.

Fluid Dynamics,Computational Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to evaluate the performance of **Wall - Modeled Large - Eddy Simulation (WMLES)** in predicting the near - field noise level of NASA X - 59 low - boom flight demonstrator. Specifically, the research objectives include the following aspects:

1. **Prediction of near - field pressure signature**
The research uses the WMLES method to analyze the near - field noise level of the X - 59 QueSST experimental aircraft under cruise conditions and compares it with the results of numerical studies based on the Reynolds - Averaged Navier - Stokes equations (RANS). Through different sub - grid - scale (SGS) models and grid resolutions, the prediction ability of WMLES for the near - field pressure signature is evaluated.

2. **Improving the universality of turbulence modeling**
Although the current RANS method shows reasonable performance in shock wave prediction far from the boundary layer, it still has limitations when dealing with complex flow regimes (such as separated flow, after - body flow, three - dimensional uniform flow, shock waves, aero - acoustic noise, etc.). The paper hopes to provide higher universality through the WMLES method and develop sub - grid - scale models suitable for a wide range of flow regimes.

3. **Capturing the interaction between shock waves and expansion waves**
In the trailing - edge region of the X - 59 QueSST aircraft, the complex interaction between shock waves and expansion waves may lead to differences between WMLES and RANS predictions. The paper attempts to explore the reasons for these differences and provide guidance for improving the WMLES model in the future.

4. **Trade - off of computational cost**
The computational cost of WMLES is higher than that of RANS, but its prediction accuracy may be closer to the real flow situation. The paper analyzes the computational efficiency of WMLES through specific case studies and explores how to optimize the model to reduce the computational cost.

### Core problem summary:
The core problem of the paper is to evaluate the performance of WMLES in the following aspects:
- Whether it can accurately predict the near - field pressure signature of the X - 59 QueSST aircraft.
- How to improve the SGS model to adapt to the interaction between shock waves and expansion waves in supersonic flow.
- How to optimize the computational cost of WMLES to make it more practical while ensuring accuracy.

Formula examples:
- Definition of near - field pressure signature:
\[
p=\frac{\Delta p}{p_{\infty}}\times100
\]
where \(\Delta p = p_s - p_{\infty}\), \(p_s\) is the pressure measured by the probe, and \(p_{\infty}\) is the free - stream static pressure.

- Transformed \(x\)-coordinate:
\[
X_N=\frac{x - L_{BODY}}{\tan(\mu_M)}
\]
where \(\mu_M=\sin^{-1}(1/M)\) is the Mach angle and \(L_{BODY}\) is the fuselage length of the aircraft.

Through the research of these problems, the paper aims to promote the application of the WMLES method in supersonic aircraft flow prediction and provide references for future turbulence modeling.