Abstract:The glass fiber-reinforced metal laminates (GLARE) cannot be used to form complex laminate structures in the aerospace industry, because there is substantial variation in the plasticity of the heterogeneous materials. Hence, a compound process for composite materials based on the thermoforming technology for aluminum alloy and fiber-reinforced metal laminates (FMLs)-forming technology was proposed; it contains solution heat treatment, thermoforming, quick cold die quenching, artificial aging integrated process (HFQ), and the thermal consolidation of fiber-reinforced metal laminates, and it is named the HFQ-FMLs forming process. In order to test and judge the effect of the heat treatment on the properties of the materials obtained by the new technology, the pure metal sheet and the three kinds of HFQ-FMLs composite laminates fabricated with the different layup method were assessed with the Vickers hardness test and the Charpy impact test at the same time, and they were labeled #1, #2, #3, #4, respectively. In the Charpy impact test, in order to obtain accurate data, the shape and fixing position of the specimen was optimized so that the gap direction was parallel to the loading direction. After the heat treatment, the properties of the aluminum alloy were improved, the hardness will affect the energy absorption of the laminates, and the relationship between the thickness, hardness and impact properties will be analyzed. The hardness test results are 39.9 HV, 37.5 HV, 37.4 HV, 37.1 HV which indicates the pure metal sheet had the greatest hardness, and the greater the thickness of fiber layer, the lower was the hardness of the HFQ-FMLs composite laminate. The impact resistance of the HFQ-FMLs composite laminates was about two times of the pure metal sheet for the same thickness, and the values are 2.3 J, 4.8 J, 4.8 J, 4.8 J, respectively. In addition, the method of laying the fiber layer had no effect on the impact resistance of the composite laminates. For the novel composite laminates subjected to different cutting processes, the scanning electron microscope (SEM) results for the incision morphology suggest that the water cutting process ensures the structural integrity of the composite laminates after the edges' and holes' cutting procedures, and the performance maintains continuity.

Effect of processing method on the spring-in of aircraft ribs

Design and analysis of the mandrel structure for a composite S-shaped inlet

An alternative method to reduce process-induced deformation of CFRP by introducing prestresses

Analysis of curing deformation for resin matrix composite T-shaped stiffened panel

Evaluation of the mechanical properties and deformability of metal-based composite sheets made of thin stainless-steel sheets and carbon fiber reinforced plastics

Mechanical Behaviors and Bending Effects of Carbon Fiber Reinforced Lattice Materials

The Research on RTM Molding Process of Thin-wall Rib Structure of Composite Materials

Spring-in behavior of woven carbon fiber/polycarbonate thermoplastic composites

Inherent relationship between process parameters, crystallization and mechanical properties of continuous carbon fiber reinforced peek composites

The Effect of Structural and Process Parameters on the Effective Properties of Polymer Composites Reinforced by Fiber-rod and Three-dimensional Weaving

Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet

Experimental and Finite Element Simulation of Torsional Performance of Skin-core Carbon Fiber-reinforced Composite Rod

Experimental Research on Fiber Compaction of L-shaped Stiffeners in Stiffened Skins by Autoclave Process

Experimental Research on the Thermal-Consolidation Compound Forming of Thermosetting Fiber Metal Laminates Design for Complex Structures with Variable Curvature

The effect of stacking sequences on energy absorption in axial crushing of CFRP stanchions for the cargo floor structure of airplanes

Experimental investigation on the compression‐after‐double‐impact behaviors of GFRP laminates embedded with aluminum mesh

Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties

Effect of Shear Span-to-depth Ratio on the Mechanical Behavior of Composite Sandwich Beams with GFRP Ribs and Balsa Wood Core Materials

Axial compression behavior of mechanized filament-wound GFRP-steel tubed concrete stub columns

Investigation of the spring-back phenomenon in two-dimensional bending of continuous glass fiber-reinforced polyamide composite sheets

Spring-In Prediction of CFRP Part Using Coupled Analysis of Forming and Cooling Processes in Stamping