Abstract:The plasma sprayed Fe-based Ni/WC composite coating on the surface of 45 steel was post-treated by laser remelting with the addition of nano-SiC. The effect of laser power on the interface microstructure of a laser remelting nano-SiC modified Fe-based Ni/WC composite coatings were researched. The metallographic structure, microscopic morphology, phase composition, and microhardness of the remelted layer were visually analyzed by metallographic microscope, scanning electron microscope (SEM), X-ray diffractometer (XRD), and microhardness tester, respectively. The results showed that the nano-SiC modified remelted coating was smooth and compact, and with no fine cracks. The remelted layer was mainly composed of [Fe,Ni], Cr, Fe0.04Ni0.36 phase. The metal elements Fe, Ni, Cr, and Si, and non-metallic element C, appeared to diffuse, and there was metallurgical bonding between the coating and the matrix. With the increase of laser power, the smaller the average grain size, the wider the half-peak height (FWHM), and the more obvious the grain refinement. When the laser power was 500 W, the interface metallurgical showed the best effect. Furthermore, the nano-sized SiC particles served as the core of the heterogeneous nucleation to refine the grains on the one hand, and promoted the formation of a hard intermediate phase in the coating on the other hand. Therefore, the laser remelting and the addition of nano-SiC particles greatly improved the microhardness of the coating. The larger the laser power, the smaller the microstructure characteristics and the fewer the number of holes. With increasing laser power, the hardness increased in general terms and the maximum hardness increased by 51%.

On the surface characteristics and removability of RB-SiC composite processed by nanosecond pulsed laser

Fabrication and functional characteristics of micro/nano structures on the RB-SiC surface through nanosecond pulsed laser irradiation

Improving Polishing Efficiency of RB-SiC through Femtosecond Laser Pretreatment

Removal mechanism of SiC/SiC composites by underwater femtosecond laser ablation

Effect of Femtosecond Laser Processing Parameters on the Ablation Microgrooves of RB-SiC Composites

Femtosecond laser surface modification of 4H-SiC improves machinability

Femtosecond laser modification of silicon carbide substrates and its influence on CMP process

Laser-assisted grinding of RB-SiC composites: Laser ablation behavior and mechanism

Ablated surface morphology evolution of SiCp/Al composites irradiated by a nanosecond laser

Investigation on the impact of thermal softening effect induced by nanosecond pulsed laser-assisted cutting on the deformation mechanism of SiCp/Al composites

High-Power Femtosecond Laser Processing of SiC Ceramics with Optimized Material Removal Rate

The ablation behavior and modification mechanism of SiC under different laser energy

Laser ablation behavior and mechanism of Cf/C–SiC composites under different laser energy densities

Removal mechanism of 2.5-dimensional carbon fiber reinforced ceramic matrix composites processed by nanosecond laser

A new method for machining RB-SiC with high efficiency and quality: Laser assisted ultrasonic grinding

The Effect of Laser Power on the Interface Microstructure of a Laser Remelting Nano-SiC Modified Fe-Based Ni/WC Composite Coating

Femtosecond laser surface modification coupling with surface metallurgical reaction promotes surface plasticity of SiC

Investigations on the oxidation behavior and removal mechanism of SiC/SiC composites by multi-pulse femtosecond laser ablation

Experimental and MD simulation study of surface residual stress and surface quality of SiCp/Al in pulsed laser-ultrasonic assisted grinding

Investigations on the ablation behavior of C/SiC under femtosecond laser

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face