Abstract:<p>In order to further recover the waste heat from sulfide-containing flue gas, improve the recovery efficiency and reduce corrosion of heat exchanger before flue gas desulfurizer (FGD), a novel system based on the phase change heat transfer theory is proposed to recover the waste heat from sulfide-containing flue gas. The performance of novel waste heat recovery system is investigated by the experimental method. The results show that the heat recovery coefficient will increase with the heat load ratio while decrease with the circulation ratio. To ensure the high-efficiency operation of the novel system, the mass flow rate of lithium bromide solution should be adjusted in terms of the heat load ratio and circulation ratio in range of 48–178. Otherwise, it will be only adjusted in terms of the heat load ratio and increase with that. The exergy efficiency of the novel system will reduce with the heat load ratio because of the influence of energy efficiency of FGHE. But the exergy efficiency is about 25%–34% and lower. The heat transfer coefficient of FGHE is relatively higher for the heat load ratio in range of 0.7–1.1. The novel system is more advantageous in waste heat recovered from flue gas, the CO<sub>2</sub> emission reduction and economic performance when the acid dew point temperature in range of 110–140 °C is changed under different operation conditions. The above conclusions will provide a theoretical basis for the operation of novel waste heat recovery system for sulfide-containing flue gas.</p>

Experimental and numerical studies on novel airfoil fins heat exchanger in flue gas heat recovery system

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

On-site experimental study on fouling and heat transfer characteristics of flue gas heat exchanger for waste heat recovery

Airside Thermal–hydraulic Performance Evaluation of Flue Gas Coolers for Waste Heat Recovery

An Experimental and Numerical Investigation of Air Side Heat Transfer and Flow Characteristics on Finned Plate Configuration

Investigation of the flow and heat transfer characteristics of helium gas in printed circuit heat exchangers with asymmetrical airfoil fins

Thermal-hydraulic Performance of Novel Louvered Fin Using Flat Tube Cross-Flow Heat Exchanger

Air Side Performance of a Novel Lanced Fin and Flat Tube Heat Exchanger

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers

Experimental and numerical study and comparison of performance for herringbone wavy fin and enhanced fin with convex-strips in fin-and-tube heat exchanger

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Experiment on Forced Convection-Condensation Heat Transfer Characteristics Based on Finned Plate Configuration

Experimental Study on the Performance of a Novel Fin-Tube Air Heat Exchanger with Punched Longitudinal Vortex Generator

Experimental study on novel waste heat recovery system for sulfide-containing flue gas

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns

Performance Investigation of an Innovative Offset Strip Fin Arrays in Compact Heat Exchangers

Flow and Heat Transfer Characteristics of Finned Tube with Internal and External Fins in Air Cooler for Waste Heat Recovery of Gas-Fired Boiler System

Experimental Study on Heat Transfer and Resistance Characteristics of H-Type Finned Tube

Numerical and Experimental Study on the Flow and Heat Transfer Performance of a Plate-Fin Heat Exchanger Using for Environmental Protection

Hydraulic and Thermal Performances of A Novel Configuration of High Temperature Ceramic Plate-Fin Heat Exchanger

Assessment and Optimization of Exhaust Gas Heat Exchanger with Porous Baffles and Porous Fins