Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

MgAl Hydride Films for Enhanced Energy Conversion Efficiency of a Laser‐Driven Flyer

Promoted plasma generation for laser-driven flyer by MgAl hydride films

Optimization of the composition of Al-Mg alloy films for laser-driven flyer

Improving the Energy Conversion Efficiency of a Laser-Driven Flyer by an in Situ-Fabricated Nano-absorption Layer

LiAlH4 As a “microlighter” on the Fluorographite Surface Triggering the Dehydrogenation of Mg(BH4)2: Toward More Than 7 Wt % Hydrogen Release below 70 °C

Perfect metamaterial absorber improved laser-driven flyer

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

The Influence of Beam Energy Profile on the Flight Behavior of a Laser-Driven Flyer

Hydrogen desorption properties of the MgH2-AlH3 composites

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Fabrication of Al@AIH@PVDF metastable composite film with enhanced laser ignition ability and combustion performance

Formation of Mg–Al LDHs coating by hydrothermal treatment on laser remelting pretreated AZ31 magnesium alloy for enhanced corrosion resistance

Improved Hydrogen Storage Properties in Mg-based Thin Films by Tailoring Structures

Influence of Laser Beam Profiles on the Performance of Laser‐Driven Flyers

Improving the energy release characteristics of PTFE/Al by doping magnesium hydride

Functional gradient films on aluminum alloy to improve its laser-induced damage ability and reduce pollutant particles' generation

Launch and Impact Characteristics of Typical Multi-Layered Flyers Driven by Ns-Pulsed Laser

Tailoring the discharge performance of extruded Mg-Sm-Al anode for Mg-air battery applications via control of Al content

Great Photoluminescence Enhancement in Al-sputtered Zn_078Mg_022O Films

Microstructures and Properties in Surface Layers of Mg-6Zn-1Ca Magnesium Alloy Laser-Clad with Al-Si Powders

Enhanced Energetic Performances Based on Integration with the Al/PTFE Nanolaminates