Abstract:Magnesium hydride has attracted great attention because of its high theoretical capacity and outstanding reversibility, nevertheless, its practical applications have been restricted by the disadvantages of the sluggish kinetics and high thermodynamic stability. In this work, an unexpected high reversible hydrogen capacity over 8.0 wt% has been achieved from MgH2 metal hydride composited with small amounts of LiBH4 and Li3AlH6 complex hydrides, which begins to release hydrogen at 276 degrees C and then completely dehydrogenates at 360 degrees C. The dehydrogenated MgH2 + LiBH4/Li3AlH6 composite can fully reabsorb hydrogen below 300 degrees C with an excellent cycling stability. The composite exhibits a significant reduction of dehydrogenation activation energy from 279.7 kJ/mol (primitive MgH2) to 139.3 kJ/mol (MgH2 + LiBH4/Li3AlH6), as well as a remarkable reduction of dehydrogenation enthalpy change from 75.1 kJ/mol H-2 (primitive MgH2) to 62.8 kJ/mol H-2 (MgH2 + LiBH4/Li3AlH6). The additives of LiBH4 and Li3AlH6 not only enhance the cycling hydrogen capacity, but also simultaneously improve the reversible de/rehydrogenation kinetics, as well as the dehydrogenation thermodynamics. This notable improvement on the hydrogen absorption/desorption behaviors of the MgH2 + LiBH4/Li3AlH6 composite could be attributed to the dehydrogenated products including Li3Mg7, Mg17Al12 and MgAlB4, which play a key role on reducing the dehydrogenation activation energy and increasing diffusion rate of hydrogen. Meanwhile, the LiBH4 and Li3AlH6 effectively destabilize MgH2 with a remarkable reduction on dehydrogenation enthalpy change in terms of thermodynamics. In particular, the Li3Mg7, Mg17Al12 and MgAlB4 phases can reversibly transform into MgH2, Li3AlH6 and LiBH4 after rehydrogenation, which contribute to maintain a high cycling capacity. This constructing strategy can further promote the development of high reversible capacity Mg-based materials with suitable de/rehydrogenation properties. (C) 2020 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Promoted plasma generation for laser-driven flyer by MgAl hydride films

MgAl Hydride Films for Enhanced Energy Conversion Efficiency of a Laser‐Driven Flyer

Pulsed Barium Vapor Laser with Hydrogen Additive and Interactive Circuit

Optimization of the composition of Al-Mg alloy films for laser-driven flyer

LiAlH4 As a “microlighter” on the Fluorographite Surface Triggering the Dehydrogenation of Mg(BH4)2: Toward More Than 7 Wt % Hydrogen Release below 70 °C

Synergistic Effect of LiBH4and LiAlH4Additives on Improved Hydrogen Storage Properties of Unexpected High Capacity Magnesium Hydride

Hydrogen Generation from Mg–LiBH4 Hydrolysis Improved by AlCl3 Addition

Hydrogen desorption properties of the MgH2-AlH3 composites

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Ultra-fast response behavior of aluminum hydride (AlH3) in a quasi-detonation environment

Synthesis Of Mg@Mg17al12 Ultrafine Particles With Superior Hydrogen Storage Properties By Hydrogen Plasma-Metal Reaction

Perfect metamaterial absorber improved laser-driven flyer

Improved Hydrogen Generation from the Hydrolysis of Aluminum Ball Milled with Hydride

Synthesis and Hydrogen Storage Properties of the Mg-Al Nanoparticles by Acetylene Plasma Metal Reaction

Hydrogen generation from the hydrolysis of Mg powder ball-milled with AlCl3

Extreme high reversible capacity with over 8.0 wt% and excellent hydrogen storage properties of MgH<sub>2</sub> combined with LiBH<sub>4</sub> and Li<sub>3</sub>AlH<sub>6</sub>

Thermogravimetric Analysis of Hydrogen Production of Al–Mg–Li Particles and Water

Ultrafast Hydrogen Production via Hydrolysis of MgH2-NaH Composite

Direct Hydrogen Production Promoted by Laser-Induced Water Plasma

Hydrolysis of Mg-based Alloys and Their Hydrides for Efficient Hydrogen Generation

Improved Hydrogen Storage Properties in Mg-based Thin Films by Tailoring Structures