Abstract:Aimed at improving the combustion and thermal performance of micro combustor to increase energy output, a Y-shaped fin is designed to enhance the heat transfer. Firstly, the combustion and thermal performance of conventional micro combustor (MC), micro combustor embedded with straight fin (MCESF) and micro combustor embedded with Y-shaped fin (MCEYF) are compared. The results show that the embedding of Y-shaped fin improves the combustion and thermal performance obviously, especially MCEYF has the best comprehensive performance, meanwhile the mean outer wall temperature and the combustion efficiency are up to 1213.3K and 99.14% at 5m/s, which are significantly higher than MC and MCESF. Besides, a larger Y-shaped fin length is beneficial to fully enhance the heat transfer, but it directly destroys the temperature uniformity and consumes huge power due to the huge inlet pressure. Although the fin length of 12mm brings an exergy up to 19.11W, but the outer wall maximum temperature difference and inlet pressure have reached 181.38K and 246.38Pa, and Y-shaped fin with length of 8mm maintains best comprehensive performance at 5m/s. In addition, increasing the inlet velocity is conducive to improving the energy conversion, resulting in greater radiation energy and exergy, but it reduces the radiation efficiency and the exergy efficiency, meanwhile bring a huge pressure drop. Exergy increases from 13.68W to 18.39W with an inlet velocity from 3m/s to 8m/s, but the corresponding exergy efficiency decreases from 50.42% to 25.42%, and the low efficiency causes a large amount of energy to be lost as exhaust gas. Based on the analysis of the combustor material, high thermal conductivity material is beneficial to MTPV system energy conversion, and the combined use of multiple materials is worth considering. This study obtained the combustion and thermal characteristics under the action of Y-shaped fin, providing reference value for the energy conversion improvement of the micro thermo-photovoltaic system.

Studies on heat transfer performance of miniature cross-flow heat exchangers with perforated fins for direct methanol fuel cells

A Numerical Study on the Air-Side Heat Transfer of Perforated Finned-Tube Heat Exchangers with Large Fin Pitches

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

An Experimental Study on the Air Side Heat Transfer Performance of the Perforated Fin-Tube Heat Exchangers under the Frosting Conditions

Fluid Flow and Heat Transfer Performance in a Micro-Reactor with Non-Uniform Micro-Pin-fin Arrays for Hydrogen Production at Low Reynolds Number

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Research on low-temperature performance of plate-fin hydrogen preheater for a proton-exchange membrane fuel cell

An Experimental Study on the Offset-Strip Fin Geometry Optimization of a Plate-Fin Heat Exchanger Based on the Heat Current Model

Thermal performance promotion of a novel double-tube heat exchanger by helical fin with perforations

Performance Investigation of an Innovative Offset Strip Fin Arrays in Compact Heat Exchangers

Performance analysis of a heat exchanger having perforated square fins

Comprehensive numerical insight the thermal performance improvement of the micro combustors with internal bionic Y-shaped fins for micro-thermal voltaic system applications

Numerical study on combustion characteristics and heat transfer enhancement of the micro combustor embedded with Y-shaped fin for micro thermo-photovoltaic system

Thermal performance maximisation in a complex heat exchanger with solid and hollow cylindrical fins

The Impact of Square Shape Perforations on the Enhanced Heat Transfer from Fins: Experimental and Numerical Study

On the Heat Transfer Enhancement of Plate Fin Heat Exchanger

Enhanced heat transfer characteristics of nano heat exchanger with periodic fins: A molecular dynamics study

Numerical Modeling and Experimental Verification of Flow and Heat Transfer over Serrated Fins at Low Reynolds Number

Optimization of Thermoelectric Performance of Offset-strip Fin Type Exhaust Heat Exchanger