Abstract:Plate heat exchangers are widely used in various industries. This study considers using a novel design of fractal shape fins with a new structure on the performance of multi-stream plate-fin heat exchangers for the first time, which has not been studied by researchers before. The numerical study is done with a 3D finite volume method. The effect of using Oil/MWCNT nanofluid and using various configurations of fractal fins with different attack angles ranging from 30 degrees to 100 degrees with the range of Reynolds number of 10,000–40,000, have been studied in the current research. These changing parameters have a significant impact on the flow field and heat transfer in the heat exchanger. The results of this study show that increasing the angle of attack of fractal fins creates more flow deflection and higher fluid mixing. The rise of the Reynolds number creates stronger vortexes as the flow passes over the fins, thereby it can augment the fluid mixing in the areas which are close to the finned. As the Reynolds number rises, the growth of the thermal boundary layer diminished. It can also be seen that as the fluid impacts the fractal fins at higher angles of attack, the temperature distribution becomes more uniform in the heat exchanger. Increasing the Reynolds number from 10,000 to 40,000 increases the heat transfers up to 63 %. At the constant Reynolds numbers, increasing the fraction of solid nanoparticle volume up to 4 % in the cooling fluid augment the heat transfer rate by 48 % compared to the base fluid. Increasing the fluid velocity results the amplification of longitudinal vortex formation. Therefore, the pressure loss is higher at the increased Reynolds numbers. At the lower Reynolds numbers, the pumping power has a weaker dependency on the nanofluids concentration. Increasing the angle of attack of fractal fins increases the pumping power by 50 % compared with the angle of attack of 30 degrees. Increasing the fractal fin angle of attack compared with 30 degrees increases friction by 45–85 %. Changes in the Colburn factor show that considering all parameters that increase heat transfer, the Colburn factor increases by 23–42 % compared with the base scenario with Re = 10,000 and angle of attack = 30 degrees.

Enhanced heat transfer characteristics of nano heat exchanger with periodic fins: A molecular dynamics study

Molecular dynamics study of convective heat transfer mechanism in a nano heat exchanger

Novel usage of the curved rectangular fin on the heat transfer of a double-pipe heat exchanger with a nanofluid

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Analysis of the mechanism of enhanced heat transfer by nanofluids

Heat transfer simulation of heat storage unit with nanoparticles and fins through a heat exchanger

A Molecular Dynamics Simulation on the Convective Heat Transfer in Nanochannels

Comparative studies on heat transfer and flow resistance of nanofluid in microchannels with different sidewall micro-fins

A Molecular Dynamics Simulation of Nanoscale Convective Heat Transfer with the Effect of Axial Heat Conduction

Investigation on the enhancement of heat transfer in counterflow double-pipe heat exchanger using nanofluids

Numerical simulation of nanofluid turbulent flow in a double-pipe heat exchanger equipped with circular fins

Study on the flow and heat transfer characteristics of a hybrid nanofluid jet impingement microchannel heat sink with airfoil fins

Thermal performance maximisation in a complex heat exchanger with solid and hollow cylindrical fins

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Numerical investigation of turbulent nanofluid flow behavior in a multi-stream plate-fin heat exchanger with a novel design of fractal fins

Heat transfer enhancement using combined microchannel with vertical rectangular micro fins

Performance Investigation of an Innovative Offset Strip Fin Arrays in Compact Heat Exchangers

Numerical investigation of the impact of toothed fins on the heat transfer performance of a shell-and-tube exchanger during phase change material melting process

A study of the heat transfer characteristics of the micro-channel heat sink

Studies on heat transfer performance of miniature cross-flow heat exchangers with perforated fins for direct methanol fuel cells

Enhancing Heat Transfer Performance: Nanofluids Application in Helical Microfin Tube Concentric Heat Exchangers