Abstract:The present work describes the preparation and characterization of new glass and glass-ceramic systems dependent on the Na2O–CaO–SiO2 composition which modified with partial CdO/CaO and Fe2O3/SiO2 substitutions. Typical temperatures for thermal analysis were examined by DTA and dilatometry measurements as a function of CdO and Fe2O3 contents. As well, the chemical stability and control crystallization of the newly established glasses and glass-ceramics were decided and discussed. The Tg and Tc temperatures decreased, while the CTE values increased with CdO and Fe2O3 contents. The produced glass-ceramics were dense and well-crystallized, including precipitation of the Na4Ca4Si6O18 phase with its derivative of the Na6Cd3Si6O18 phase, in addition to CaFeSi2O6 of the pyroxene type. The CTE of the prepared glasses and glass-ceramics is linearly increasing as a function of compositions. The values vary within the range of 33–72 × 10−7 °C−1 for the glasses, whereas they ranged from 57-104 × 10−7 °C−1 for their corresponding glass-ceramics. The results of the dissolution rate indicated that the DR ratio was increased by CdO/CaO replacements for the glasses and their crystalline samples. While the durability improved by Fe2O3/SiO2 substitutions. The DR and CTE values of the prepared materials are very close to or surpass the values of commercial sealing materials. The thermo-chemical properties showed that the prepared glass-ceramics, especially those with high Fe2O3/SiO2 replacement, are promising candidates as environmentally safe sealant materials for different applications, such as encapsulating photovoltaic cells and sensors used in unmanned systems in military applications.

Investigation on structure and properties of nitride-tin-boron-fluorophosphate glass for low-temperature sealing

Preparation and characterization of new sealing glasses based on Li2O-NiO-P2O5 system

Luminescence and structural evolution in ultra‐low melting quaternary tin fluorophosphate glasses (NaF‐SnF 2 ‐SnO‐P 2 O 5 )

Low Temperature Sintering and Performance of Aluminum Nitride/Borosilicate Glass

Structure and sintering behavior of BaO–SrO–B2O3–SiO2 sealing glass for Al2O3 ceramic substrates

Effects of Post Annealing Atmosphere on Electrical and Optical Properties of SnO2：F Thin Films

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Physical-Chemical Properties of Low-Melting Phosphate Glasses in Relation to Tin Oxide Content

Low Temperature Sintering and Microwave Dielectric Properties of Ba4nd9.33ti18o54 Ceramics Doped with Crystallizable Glass

Investigation of the P2O5–Bi2O3–CaO system: Glass forming region, structure, properties

Low Temperature Sintering and Microwave Dielectric Properties of Ba<sub>4</sub>Nd<sub>9.33</sub>Ti<sub>18</sub>O<sub>54</sub> Ceramics Doped with Crystallizable Glass

Improving properties of Na2O–CaO–SiO2 glass by CdO, Fe2O3 addition and its crystallization for sealing applications

Low-temperature sintering kinetics and dielectric properties of Ba5Nb4O15 with B2O3–SiO2 glass

Effect of Glass Tempering on Microstructure and Functional Properties of SnO2:F Thin Film Prepared by Atmosphere Pressure Chemical Vapor Deposition

Effect of Introducing KNO3 on the Preparation of Athermal Fluorophosphate Glass and Investigation on Its Thermo-Optical Property

Effects of composite nucleating agents on crystallization behavior and properties of fluorphlogopite glass-ceramics

Structure and Properties of Bao-Al2o3-B2o3 Glass Sealants

Low Melting Pbo-Zno-P2o5 Glasses

Low‐Fire Processing of Microwave BNBT‐Based High‐k Dielectric with Li2O–ZnO–B2O3 Glass

Characteristics Of Bao-Al2o3-B2o3 Glass Sealants For Low Temperature Solid Oxide Fuel Cells

Low-temperature glass bonding for sensor application using boron oxide thin films