Abstract:This paper presents a numerical approach to simulate sliding friction between engineering surfaces with 3D roughness in point contacts. The numerical approach is developed on the basis of the deterministic solutions of mixed lubrication, which is able to predict the locations where the asperity contacts occur, and the pressure distribution over both lubrication and contact areas. If the friction coefficients over the contacting asperities have been determined, total friction force between the surfaces can be calculated by summing up the two components, i.e., the boundary friction contributed by contacting asperities and the shear stress in hydrodynamic regions. The fi-ictions from asperity contact were determined in terms of a limiting shear stress or shearstrength of boundary, films while the fluid shear stress in the lubrication areas was calculated using different rheology models for the lubricant, in order to find which one would be more reliable in predicting fluid tractions. The simulations covered the entire lubrication, regime, including full-film Elastohydrodynamic Lubrication (EHL), mixed lubrication, and boundary lubrication. The results, when being plotted as a function of sliding velocity, give a Stribeck-type friction curve. This provides an opportunity to study friction change during the transition of lubrication conditions and to compare friction performance oil different rough surpces, which is of great value in engineering practice. Experiments were conducted on a commercial test device-universal material tester (UMT) to measure friction at a fixed load but different sliding velocities in reciprocal or rotary motions. The results also give rise to the Stribeck friction curvesfor different rough surfaces, which are to be compared with the results from simulations. The samples were prepared with typical machined surfaces in different roughness heights and textures, and in point contacts with steel ball. Results show that there is a general agreement between the experiments and simulations. It is found that surface features, such as roughness amplitude and patterns, may have a significant effect on the critical speed of transition firom hydrodynamic to mixed lubrication. It? the regime of mixed lubrication, rougher samples would give rise to a higherfiriction if the operation conditions are the same.

Experimental testing of the Prandtl–Tomlinson model: Molecular origin of rotational friction

Experimental testing of the Prandtl-Tomlinson model: Molecular origin of rotational friction

Active Control of Friction Realized by Vibrational Excitation: Numerical Simulation Based on the Prandtl-Tomlinson Model and Molecular Dynamics

Atomistic mechanism of friction force independence on the normal load and other friction laws for dynamic structural superlubricity

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Multi-scale model predicting friction of crystalline materials

Molecular Origin of Friction

Thermodynamics Model for Stribeck Curve and Experiments: the Role of Interfacial Interaction

Transition of frictional states and surface roughness effects in lubricated contacts

Simulations And Measurements Of Sliding Friction Between Rough Surfaces In Point Contacts: From Ehl To Boundary Lubrication

Dry Friction due to Adsorbed Molecules

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

Atomistic insight into flash temperature during friction

Tribological mechanism of micro/meso/macroscopic textured surfaces under different normal forces, relative velocities, and sliding directions

Atomic stick-slip friction as a two-dimensional thermally activated process

Molecular Dynamics Simulation of Friction in Self-Lubricating Materials: An Overview of Theories and Available Models

Rotational Instability in Superlubric Joints.

Dynamical force measurements for contacting soft surfaces upon steady sliding: Fixed-depth tribology

Computer Simulations of Friction, Lubrication and Wear

Robustness of Structural Superlubricity Beyond Rigid Models

Unraveling Tribochemistry and Self-Lubrication Mechanism of Polytetrafluoroethylene by Reactive Coarse-Grained Molecular Dynamics Simulations.