Abstract:It’s a critical issue for the successful commercialization of solid oxide fuel cells (SOFCs) to achieve long-term thermal stability without significant performance degradation. Current work reports a cost-competitive and scalable method for modifying porous Gadolinia doped ceria (GDC) barrier layers, to obtain an almost-dense, sintering-active, and Sr-blocking cathode/electrolyte interface, by growing nanoparticles in-situ on porous surfaces. The cell performance only deteriorates by ~0.5% after 20 times thermal cycles as the temperature fluctuated between 200 and 750 ℃, which is more prominent enhancement than ~16% for pristine cell, and exhibits higher initial performance. The hydrothermal modified symmetric cell shows ~60% polarization resistance decrease and well-attached cathode/electrolyte interfaces after ~1200 hours of operation, exhibiting excellent stability while the pristine cell interfaces peeled off. The performance improvements and prolonged operation mechanisms are discussed and mainly attributed to the almost-dense barrier layer and robust cathode/electrolyte interfaces.It’s a critical issue for the successful commercialization of solid oxide fuel cells (SOFCs) to achieve long-term thermal stability without significant performance degradation. Current work reports a cost-competitive and scalable method for modifying porous Gadolinia doped ceria (GDC) barrier layers, to obtain an almost-dense, sintering-active, and Sr-blocking cathode/electrolyte interface, by growing nanoparticles in-situ on porous surfaces. The cell performance only deteriorates by ~0.5% after 20 times thermal cycles as the temperature fluctuated between 200 and 750 ℃, which is more prominent enhancement than ~16% for pristine cell, and exhibits higher initial performance. The hydrothermal modified symmetric cell shows ~60% polarization resistance decrease and well-attached cathode/electrolyte interfaces after ~1200 hours of operation, exhibiting excellent stability while the pristine cell interfaces peeled off. The performance improvements and prolonged operation mechanisms are discussed and mainly attributed to the almost-dense barrier layer and robust cathode/electrolyte interfaces.

Revitalizing interface in protonic ceramic cells by acid etch

Interfacial Engineering of Protonic Ceramic Electrochemical Cells by Acid Etch

Interfacial Modification for High-Efficient Reversible Protonic Ceramic Cell with a Spin-Coated BaZr0.1Ce0.7Y0.2O3-δ Electrolyte Thin Film

New Strategy for Boosting Cathodic Performance of Protonic Ceramic Fuel Cells Through Incorporating a Superior Hydronation Second Phase

Microstructure optimization of fuel‐electrodes for high‐efficiency reversible proton ceramic cells

Interfacial Modification for High-Efficient Reversible Protonic Ceramic Cell with a Spin-Coated BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ Electrolyte Thin Film

Enhancing Voltage Reversal Tolerance of Proton Exchange Membrane Fuel Cells by Tuning the Microstructure of IrO x Catalysts

(Invited) Recent Progress in the Development of Highly Durable and Conductive Proton Conductors for High-Performance Reversible Solid Oxide Cells

Enhanced Proton Conduction with Low Oxygen Vacancy Concentration and Favorable Hydration for Protonic Ceramic Fuel Cells Cathode

Interphase Engineering Enhanced Electro‐chemical Stability of Prelithiated Anode

Unraveling the conundrum of electronic leakage in protonic ceramic cells: Operation-specific insights and rational design strategies

Cathode Water Management Towards Improved Performance of Protonic Ceramic Fuel Cells

An Unbalanced Battle in Excellence: Revealing Effect of Ni/Co Occupancy on Water Splitting and Oxygen Reduction Reactions in Triple-Conducting Oxides for Protonic Ceramic Electrochemical Cells

Enhanced Cathode/Electrolyte Interface by a Nano-Modified Barrier Layer for Solid Oxide Fuel Cells

A review of progress in proton ceramic electrochemical cells: material and structural design, coupled with value-added chemical production

Interface Engineering to Operate Reversible Protonic Ceramic Electrochemical Cells Below 500 °C

Tailoring the Chemical/Electrochemical Response in a Quasi−Solid Polymer Electrolyte Enables the Simultaneous In Situ Construction of Superior Cathodic and Anodic Interfaces (Adv. Energy Mater. 22/2024)

Highly Active Cathode Achieved by Constructing Surface Proton Acid Sites through Electronic Regulation of Heteroatoms

Concentrated Zwitterion Interfaces for the Selective Promotion of Ionic Electrocatalysis

Enhancement of the Cathode/electrolyte Interface by a Sintering-Active Barrier Layer for Solid Oxide Fuel Cells

Biological small molecule interface-modification fostering resilient interfacial chemistry for silicon-based anodes