Abstract:In situ polymerization system can provide a compact and compatible interface with minimum polymer electrolyte, which is imperative to address the bottleneck of notorious solid–solid interface issues for high-energy-density solid-state batteries. However, the existing in situ formed solid-state electrolyte still faces many problems, such as low polymerization conversion and inferior high-voltage stability, prohibiting its applications in practical high-voltage lithium-metal batteries. Herein, we present a deep eutectic solvent (DES)-based in situ polymerized solid electrolyte, which is facile and well matched with the commercially available lithium-ion battery technology. The DES precursor is made from a molten mixture of solid powders, containing a synthesized monomer named (2-(((2-oxo-1,3-dioxolan-4-yl) methoxy) carbonylamino))-ethyl methacrylate (CUMA), a succinonitrile (SN) plastic crystal, and two kinds of lithium salts. After in situ ploymerization triggered by free radical, the liquid again turns into a solid composite electrolyte (PDES-CPE) with a superior polymerization conversion of 99.8%. It delivers a promising lithium-ion conductivity (1.07 × 10<sup>–3</sup> S/cm with a high lithium-ion transference number of 0.62 at 30 °C) and prominent high-voltage stability (100 cycles with 82.4% capacity retention coupled with 4.6 V LiCoO<sub>2</sub> cathode). Through in situ Fourier transform infrared (FTIR) spectroscopy, we reveal a robust interface chemistry with thermodynamically improved high-voltage stability (compared to polyether-based electrolyte). This as-presented strategy makes a big leap to address the interface issues and boost the development of high-energy-density solid-state lithium-metal batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c02481?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c02481</a>.Physical and chemical properties of PDES-CPE, electrochemical performance of Li/Li symmetrical cells with PDES-CPE, and electrochemical performance of batteries with PEO-based and PPC-based electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c02481/suppl_file/cm0c02481_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Tailoring the Chemical/Electrochemical Response in a Quasi−Solid Polymer Electrolyte Enables the Simultaneous In Situ Construction of Superior Cathodic and Anodic Interfaces (Adv. Energy Mater. 22/2024)

Tailoring the Chemical/Electrochemical Response in a Quasi−Solid Polymer Electrolyte Enables the Simultaneous In Situ Construction of Superior Cathodic and Anodic Interfaces

Enhancing interfacial contact in all solid state batteries with a cathode-supported solid electrolyte membrane framework

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

Supramolecular Salt‐Assisted Quasi‐Solid‐State Electrolyte Promoting Dual Conductive Interface for High‐Energy‐Density Lithium Metal Batteries (Adv. Energy Mater. 4/2024)

High Polymerization Conversion and Stable High-Voltage Chemistry Underpinning an In Situ Formed Solid Electrolyte

Durable and Adjustable Interfacial Engineering of Polymeric Electrolytes for Both Stable Ni-Rich Cathodes and High-Energy Metal Anodes

Molecule Crowding Strategy in Polymer Electrolytes Inducing Stable Interfaces for All‐Solid‐State Lithium Batteries

Engineering Molecule‐Designed In Situ Polymerization on Al‐Doped Molecular‐Sieve Framework Enables Robust Quasi‐Solid‐State Lithium Batteries

Energy Storage: Advances in Interfaces Between Li Metal Anode and Electrolyte (adv. Mater. Interfaces 2/2018)

Engineering a High-Voltage Durable Cathode/Electrolyte Interface for All-Solid-State Lithium Metal Batteries via In Situ Electropolymerization

Smart Construction of Intimate Interface Between Solid Polymer Electrolyte and 3D-Array Electrode for Quasi-Solid-state Lithium Ion Batteries

Optimized Interfaces in Anti-Perovskite Electrolyte-Based Solid-State Lithium Metal Batteries for Enhanced Performance

Formation of Excellent Cathode/Electrolyte Interface with UV-Cured Polymer Electrolyte through In Situ Strategy

In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

In Situ Constructing Ultrathin, Robust‐Flexible Polymeric Electrolytes with Rapid Interfacial Ion Transport in Lithium Metal Batteries

Molecular Reactivity and Interface Stability Modification in In‐Situ Gel Electrolyte for High Performance Quasi‐Solid‐State Lithium Metal Batteries

Composite Hybrid Quasi-Solid Electrolyte for High-Energy Lithium Metal Batteries

Facile Interfacial Modification Via In-Situ Ultraviolet Solidified Gel Polymer Electrolyte for High-Performance Solid-State Lithium Ion Batteries

An Ion‐Dipole‐Reinforced Polyether Electrolyte with Ion‐Solvation Cages Enabling High–Voltage‐Tolerant and Ion‐Conductive Solid‐State Lithium Metal Batteries (Adv. Funct. Mater. 5/2022)