Abstract:Electronic conduction through proton-conducting electrolytes significantly impairs the efficiency of protonic ceramic cells (PCCs). In this study, we explore the electron and ion mixed transport properties of four common protonic ceramics, BaZr 0.8 Y 0.2 O 3-δ (BZY82), BaZr 0.7 Ce 0.2 Y 0.1 O 3-δ (BZCY721), BaZr 04 Ce 0.4 Y 0.1 Yb 0.1 O 3-δ (BZCYYb4411), and BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ (BZCYYb1711). It marks the first instance of investigating these properties under operation-specific scenarios: fuel side of electrolysis cell, air side of electrolysis cell, fuel side of fuel cell, and air side of the fuel cell. BZCYYb1711 exhibits the highest ionic conductivity, but two to three times higher electronic leakage when exposed to oxygen-containing environments than the others. BZY82 exhibits approximately two times higher electronic leakage in a hydrogen-containing environment. BZCY721 demonstrates excellent ion transport numbers (∼0.95) across these four operating conditions. BZCYYb4411 behaves quite similarly to BZCY721. The most challenging operating environment for all candidates is the air side of fuel cell mode. This mode leads to a high initial electronic leakage, followed by a significant increase with polarization. The probable cause for this behavior is a H 2 -free, polarization-induced reduction that leads to the formation of VO• . The electron small polaron associated with VO• is released by the electrical field due to the Poole-Frenkel effect. ZnO and NiO sintering aids are found to be detrimental to the ionic conductivity of the electrolytes. In particular, NiO substantially lowers the ion transport number. The correlation of the operation-specific electronic leakage to full cells is discussed. It is suggested that a rational PCC design should synergistically couple BZCYYb1711 at fuel side with BZCY4411 at air side to deliver a well-balanced performance and faradaic efficiency simultaneously, and the high temperature sintering process with a NiO fuel electrode should be shortened or replaced by ultra-fast sintering techniques or using a fuel electrode scaffold-infiltration fabrication strategy.

Microstructure optimization of fuel‐electrodes for high‐efficiency reversible proton ceramic cells

Scalable Fabrication and Resistance Deconvolution of Ni/BCZY Fuel Electrode-Supported Protonic Ceramic Cells

Electrochemical Performance and Enhancement of Hydration Kinetics on BaCo 0.7 Fe 0.2 Zr 0.1 O 3−δ Cathode for Protonic Ceramic Fuel Cells

Enhanced Oxygen Reduction Reaction Through Ca and Co Co-doped YFeO3 As Cathode for Protonic Ceramic Fuel Cells

An interesting application-oriented design of high-strength anode support for protonic ceramic fuel cells by a non-proton-conducting cermet

Enhancing the mass transfer of protonic ceramic fuel cells with open-straight pore structure via phase inversion tape casting

A New Durable Surface Nanoparticles‐Modified Perovskite Cathode for Protonic Ceramic Fuel Cells from Selective Cation Exsolution under Oxidizing Atmosphere

Surface restructuring of a perovskite-type air electrode for reversible protonic ceramic electrochemical cells

Electrolyte-electrode Interface: A Key Factor for Advanced Protonic Ceramic Electrochemical Cells

Scalable Fabrication Process for New Structure BaZr0.8Y0.2O3-δ-based Protonic Ceramic Fuel Cells

Characterization and Optimization of Highly Active and Ba-deficient BaCo0.4Fe0.4Zr0.1Y0.1O3--based Cathode Materials for Protonic Ceramics Fuel Cells

High-temperature Water Oxidation Activity of a Perovskite-Based Nanocomposite Towards Application As Air Electrode in Reversible Protonic Ceramic Cells

Porous/dense Bilayer BaZr0.8Y0.2O3-δ Electrolyte Matrix Fabricated by Tape Casting Combined with Solid-State Reactive Sintering for Protonic Ceramic Fuel Cells

Nickel Doping Manipulation Towards Developing High-Performance Cathode for Proton Ceramic Fuel Cells

Electrokinetic Insights into the Triple Ionic and Electronic Conductivity of a Novel Nanocomposite Functional Material for Protonic Ceramic Fuel Cells

Synergistic Bulk and Surface Engineering for Expeditious and Durable Reversible Protonic Ceramic Electrochemical Cells Air Electrode

Probing oxygen reduction and water uptake kinetics of BaCo0.4Fe0.4Zr0.1Y0.1-xZnxO3-δ cathodes for protonic ceramic fuel cells

Enhanced Electrochemical Performance of a Ba 0.5 Sr 0.5 Co 0.7 Fe 0.2 Ni 0.1 O 3−δ –BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ Composite Oxygen Electrode for Protonic Ceramic Electrochemical Cells

Unraveling the conundrum of electronic leakage in protonic ceramic cells: Operation-specific insights and rational design strategies

Microstructure tailoring of the BaCe0.7Zr0.1Y0.2O3-δ(BCZY)/Ni-BCZY dual-layer hollow fibers by co-spinning/co-sintering for high performance micro-tubular protonic ceramic fuel cells (MT-PCFCs)

High-performance Phosphorus-Doped SrCo0·8Fe0·2O3-δ Cathode for Protonic Ceramic Fuel Cells