Abstract:Superhydrophobic surfaces are imperative in flexible polymer foams for diverse applications; however, traditional surface coatings on soft skeletons are often fragile and can hardly endure severe deformation, making them unstable and highly susceptible to cyclic loadings. Therefore, it remains a great challenge to balance their mutual exclusiveness of mechanical robustness and surface water repellency on flexible substrates. Herein, we describe how robust superhydrophobic surfaces on soft poly(dimethylsiloxane) (PDMS) foams can be achieved using an extremely simple, ultrafast, and environmentally friendly flame scanning strategy. The ultrafast flame treatment (1–3 s) of PDMS foams produces microwavy and nanosilica rough structures bonded on the soft skeletons, forming robust superhydrophobic surfaces (i.e., water contact angles (WCAs) > 155° and water sliding angles (WSAs) < 5°). The rough surface can be effectively tailored by simply altering the flame scanning speed (2.5–15.0 cm/s) to adjust the thermal pyrolysis of the PDMS molecules. The optimized surfaces display reliable mechanical robustness and excellent water repellency even after 100 cycles of compression of 60% strain, stretching of 100% strain, and bending of 90° and hostile environmental conditions (including acid/salt/alkali conditions, high/low temperatures, UV aging, and harsh cyclic abrasion). Moreover, such flame-induced superhydrophobic surfaces are easily peeled off from ice and can be healable even after severe abrasion cycles. Clearly, the flame scanning strategy provides a facile and versatile approach for fabricating mechanically robust and surface superhydrophobic PDMS foam materials for applications in complex conditions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03272?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03272</a>.Water repellency of SiRF samples with the FIR-treated left-half surface and the untreated right-half surface (Movie S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_001.mp4">MP4</a>)Flame scanning treatment on a SiRF material and its surface temperature (Movie S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_002.mp4">MP4</a>)Surface structure stability of SiRF samples after 500 °C for 10 s (Movie S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_003.mp4">MP4</a>)Surface structure stability of SiRF samples flame scanning (∼1300 °C) treatment (Movie S4) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_004.mp4">MP4</a>)Comparison of surface hydrophobicity of pure SiRF and SiRF-FT-3s samples after exposure on a water surface (Movie S5) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_005.mp4">MP4</a>)Surface water self-sliding phenomenon of SiRF-FT-3s samples for various aqueous solutions (Movie S6) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_006.mp4">MP4</a>)Sandpaper abrasion test of the SiRF-FT-3s sample (Movie S7) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_007.mp4">MP4</a>)Water repellency of SiRF samples with FIR-treated left-half surface and the untreated right-half surface (Figure S1); photographs of WCA measurements of pure SiRF and SiRF-FT-3s and the water sliding behavior of SiRF-FT-3s at a sloping angle of ∼3° (Figure S2); XPS Si 2p spectra of pure SiRF, SiRF-FT-1s, SiRF-FT-3s, and SiRF-FT-6s after ultrafast flame scanning (Figure S3); Si 2p XPS results of various SiRF-FT samples and FTIR results of SiRF samples under 500 °C treatment for different treatment times (Figure S4); SEM images of the surface morphology of the control SiRF sample (Figure S5); SEM images of the surface morphology of the SiRF-FT-3s sample observed at different positions (Figure S6); schematic diagram of surface transition from the hydrophobic to the superhydrophobic state (Figure S7); SEM images of the surface morphology of the SiRF-FT-6s sample (Figure S8); surface structure stability of SiRF samples after 500 °C for 10 s and FIP treatment (Figure S9); comparison of surface hydrophobicity of pure SiRF and SiRF-FT-3s samples after exposure on a water surface (Figure S10); solvent/water separation process and continuous collection of SiRF-FT-3s samples for floating xylene on water and heavy CH<sub>2</sub>Cl<sub>2</sub> in water (Figure S11); demonstration cyclic abrasion process on the SiRF-FT-3s sample and surface water repellency (Figure S12); and typical SEM images of SiRF-FT-6s samples before and after the second flame scanning treatment (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_008.pdf">PDF</a>)This article has not yet been cited by other publications.

Facile fabrication of low-content surface-assembled MXene in silicone rubber foam materials with lightweight, wide-temperature mechanical flexibility, improved flame resistance and exceptional smoke suppression

Self‐Adhesive Polydimethylsiloxane Foam Materials Decorated with MXene/Cellulose Nanofiber Interconnected Network for Versatile Functionalities

Flame retardancy and smoke suppression of silicone foams with modified microencapsulated Mg/Zn/Al-layered double hydroxide

Flame Retardancy and Smoke Suppression of Silicone Rubber Foam with Microencapsulated Sepiolite and Zinc Borate

Fire-safe epoxy composite realized by MXenes based nanostructure with vertically arrayed MOFs derived from interfacial assembly strategy

Siloxane-decorated MXene nanosheet-reinforced EP composites with outstanding flame retardancy and liquid-oxygen compatibility for ultra-low-temperature applications

An Eco-Friendly, Bio-Inspired and Synergistic Flame Retardant System with Outstanding Water Tolerance and Ultra-Low Addition for Silicone Rubber

Flame retardancy and mechanical properties of silicone rubber foam composite reinforced with ZnNiAl layered double hydroxides

Fabrication of dimethyl methylphosphonate-loaded mesoporous silica nano fire extinguisher and flame retarding unsaturated polyester

Ultrafast Flame-Induced Pyrolysis of Poly(dimethylsiloxane) Foam Materials toward Exceptional Superhydrophobic Surfaces and Reliable Mechanical Robustness

Synergistic Flame‐retardant Effect of Modified Hydrotalcite and Expandable Graphite for Silicone Rubber Foam

Bio-inspired construction of hydrophobic, bio-based and halogen-free flame-retardant strategy for silicone rubber

Thermal management ability and flame retardancy of silicone rubber foam filled with flame retardant phase change capsules

Hydrogen bonding induced polyphosphazene/MXenes 2D/2D structure loaded with MOFs enabling fire-safe epoxy composite

Chemical‐Physical Synergistic Assembly of MXene/CNT Nanocoatings in Silicone Foams for Reliable Piezoresistive Sensing in Harsh Environments

Effect of Al‐based metal‐organic frameworks/halloysite nanotubes on the flame retardancy of silicone rubber foam

Synthesis of Core/Shell Structured Zinc Borate/Silica and Its Surface Charring for Enhanced Flame Retardant Properties

Fabrication of CoFe‐layered double hydroxide for flame retardant and smoke suppression of silicone rubber foam

Fabrication of Ni-doped synergistic intumescent flame-retarding silicone rubber system with superior flame retardancy and water resistance

Construction of a novel halogen-free and phosphorus-free and synergistic flame retardant system with low addition in simultaneously improving the flame retardancy, water resistance and mechanical properties for silicone rubber

NiTi-layered double hydroxide nanosheets toward high-efficiency flame retardancy and smoke suppression for silicone foam