Abstract:At present, most flame retardants, especially halogenated compounds, are banned because of concern for environmental and health issues. In prospect of developing more ecofriendly and effective flame retardants, an alternative solution to develop novel biobased and inorganic flame retardants is addressed. Herein, a nano flame retardant consisting of a lamellar α-zirconium phosphate (α-ZrP) nanosheet modified with chitosan (CH), phytic acid (PA), and a metal ion (Cu<sup>2+</sup>) with a core–multishell structure is fabricated in water solution via a green and facile self-assembly method and applied to enhance the fire retardant effect of poly(vinyl alcohol) (PVA). Thermogravimetric analysis (TGA) demonstrated that after the addition of α@, PVA composites maintained their well-performed ability of char formation. The limit oxygen index (LOI) of pure PVA increased from 18.4 to 29.8% for PVA/α@ and it reached UL-94 V-1 grade. In the microscale combustion calorimeter test (MCC), the peak heat release rate (pHRR) and the total heat release (THR) of PVA/α@ sharply decreased by 82.3 and 62.2% compared with pristine PVA. The results implied that α@ could endow PVA with superior fire retardant properties. Moreover, the research manifested the synergy between α-ZrP and @Cu and a double barrier flame retardant mechanism in a condensed phase. In the α@ flame retardant system, the inorganic α-ZrP nanosheet acted as an insulating core, and the @Cu constituted an intumescent shell, where the outer @Cu intumescent shell formed an expanded char layer serving as the first barrier to hinder heat and oxygen transfer, and then the inner α-ZrP core layer, as the second barrier, would prevent the further exchange of flammable gases and energy between the polymer and fire during combustion. As a result, this ecofriendly nano flame retardant with the core–multishell structure has a potential application value.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c01531?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c01531</a>.XRD patterns of α-ZrP, @Cu, and α@ (Figure S-1); DTG curves of α-ZrP, @Cu, and α@ (Figure S-2); the XRD patterns of char residues of PVA/α-ZrP, PVA/@Cu, and PVA/α@ composites after vertical flame measurement (Figure S-3); the Raman spectrum of the char residues of pure PVA (Figure S-4); TGA data of α-ZrP, @Cu, α@, PVA, and PVA composites in N<sub>2</sub> (Table S-1); MCC data of all samples (standard deviations of three measurements are given in brackets) (Table S-2); flame retardant performance and smoke density of PVA and PVA composites (standard deviations of three measurements are given in brackets) (Table S-3); and the tensile strength of PVA and its composites (standard deviations of three measurements are given in brackets) (Table S-4) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c01531/suppl_file/an0c01531_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis of Core/Shell Structured Zinc Borate/Silica and Its Surface Charring for Enhanced Flame Retardant Properties

Reinforcing Condensed Phase Flame Retardancy through Surface Migration of Brucite@Zinc Borate-Incorporated Systems

The flame retardant cyclic olefin copolymer composites with boric acid modified ZSM-5 synergists

Synergistic modification of ZIF and silica on carbon spheres to enhance the flame retardancy of composites coatings

An Eco-Friendly, Bio-Inspired and Synergistic Flame Retardant System with Outstanding Water Tolerance and Ultra-Low Addition for Silicone Rubber

Synergistic Flame Retardancy of Linear Low-Density Polyethylene with Surface Modified Intumescent Flame Retardant and Zinc Borate

Enhancing char formation of flame retardant epoxy composites: Onigiri-like ZIF-67 modification with carboxymethyl β-cyclodextrin crosslinking

Flame retardancy and mechanical properties of silicone rubber foam composite reinforced with ZnNiAl layered double hydroxides

Growing metal–organic framework nanoparticles on short carbon fibers to improve flame retardancy, smoke suppression and mechanical properties of the flame retardant epoxy composites

Improving the flame retardancy and smoke suppression of flexible PVC by incorporating zinc borate‐modified diantimony trioxide

The preparation of ZIF-67 and its synergistic effect on fire performance of intumescent flame retardant polypropylene

Synthesis of a Reactive Template-Induced Core–Shell PZS@ZIF-67 Composite Microspheres and Its Application in Epoxy Composites

Synergistic Effects of Cerium(iv) Phosphate with Intumescent Flame Retardant in Styrene Butadiene Rubber

Flame Retardancy and Smoke Suppression of Silicone Rubber Foam with Microencapsulated Sepiolite and Zinc Borate

Bio-inspired construction of hydrophobic, bio-based and halogen-free flame-retardant strategy for silicone rubber

Bio-inspired design and fabrication of bio-based, synergistic and halogen-free flame retardant system for reducing the fire hazard of silicone rubber based on transition metal-modified tannic acid and ammonium polyphosphate

Green and Facile Fabrication of α-Zirconium Phosphate-Based Core–Multishell Nanoparticles for Enhancing Fire Retardant Performance of Poly(vinyl alcohol)

Core–shell carbon nanotubes/cobalt copper hydroxide hybrid/silicone rubber composite: flame retardancy and antistatic properties

Fabrication of Ni-doped synergistic intumescent flame-retarding silicone rubber system with superior flame retardancy and water resistance

Synergetic modification of graphitic carbon nitride by Zr-based metal-organic framework and tetraethoxysilane for improving fire performance in composite coatings

Synthesis of an Intumescent Flame Retardant and its Application to Fireproof Coatings of Steel Structures