Abstract:Asymmetric cyclic stress-controlled low-cycle fatigue (LCF) tests were performed on Mg-Y-Zn alloys with different initial long-period stacking-ordered structure (LPSO) phases at room temperature. The influences of the initial LPSO phase content on the LCF life of the tested alloys were investigated, and an improved Basquin model for predicting the LCF life was proposed, considering the influence of the initial LPSO phase content. The coupling effects of the LPSO phase content and morphology on the LCF behavior were studied through scanning electron microscopy (SEM) experiments on the fatigue fractures of three alloys. The results show that the hindrance degree of LPSO phase to fatigue cracks is affected by the morphology of LPSO phase and the relative position of the LPSO phase with respect to fatigue cracks. When fatigue cracks are perpendicular to the main LPSO phase surface, the hindering effect is more pronounced, and the hindrance degree of the LPSO with different morphologies to fatigue crack propagation predominantly follows this sequence: lamellar > granular > rod > block. When fatigue cracks are relatively parallel to the main LPSO phase surface, the hindrance degree of LPSO relative fatigue cracks with different shapes is mainly in the following order: granular > rod > lamellar > block. The variation of fatigue crack path through the LSPO phase is primarily due to the properties of the LSPO phase itself, followed by morphology and spatial relative position. In addition, under high-stress conditions, fatigue cracks primarily originate from the LPSO phase, whereas under low-stress conditions, fatigue cracks predominantly arise from the matrix. Consequently, the Mg-9Y-1.8Zn alloy exhibits the best fatigue performance under high-stress conditions with an approximate LPSO phase content of 23.7%. Meanwhile, the Mg-9Y-3.1Zn alloy, with an LPSO phase content of around 34.9% under low-stress conditions, demonstrates the best fatigue performance.

Outstanding Fatigue Performance of Mg-Gd-Zn-Zr Alloy Enriched with SFs Rather Than LPSO Structure

Effect of LPSO and SFs on Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy

Very high cycle fatigue resistance improvement of Mg-Gd-Zn-Zr alloy by introducing curved long-period stacking ordered lamellae

The high cycle fatigue property of Mg-Gd-Y-Zn-Mn alloy enhanced by LPSO phase

Development of low rare-earth containing magnesium alloy with high strength-ductility synergy by engineering nano-spaced lamellae

Enhanced Very High Cycle Fatigue Resistance of Solution Treated Mg–10Gd–3Y–1Zn–0.5Zr Magnesium Alloy Containing Long-Period Stacking Ordered Phase

Enhanced Mechanical Properties of Mg-Gd-Y-Zn-Mn Alloy by Tailoring the Morphology of Long Period Stacking Ordered Phase

Effect of long-period stacking ordered structure on very high cycle fatigue properties of Mg-Gd-Y-Zn-Zr alloys

Experimental Study of Low–cycle Fatigue Behavior in a Mg–Y–Zn Alloy with Initial LPSO Phase

Effects of Bulk LPSO Phases on Mechanical Properties and Fracture Behavior of As-Extruded Mg-Gd-Y-Zn-Zr Alloys

Deformation-induced dissolution of long-period stacking ordered structures and its re-precipitation in a Mg-Gd-Zn-Mn alloy

Effects of Nanoprecipitates and LPSO Structure on Deformation and Fracture Behaviour of High-Strength Mg-Gd-Y-Zn-Mn Alloys

The Roles of Long Period Stacking Ordered Structure and Zn Solute in the Hot Deformation Behavior of Mg-Gd-Zn Alloys

A new insight into LPSO phase transformation and mechanical properties uniformity of large-scale Mg-Gd-Y-Zn-Zr alloy prepared by multi-pass friction stir processing

The Contribution of Long-Period Stacking-Ordered Structure (LPSO) to High Strength-High Ductility Combination and Nanoscale Deformation Behavior of Magnesium-Rare Earth Alloy

Structural Features and Mechanical Properties of Mg-Y-Zn-Sn Alloys with Varied LPSO Phases

The Effect of Morphology of the Long-Period Stacking Ordered Phase on Mechanical Properties of the Mg-7Gd-3Y-1Nd-1Zn-0.5Zr (wt.%) Alloy

Understanding the High Strength and Good Ductility in LPSO-Containing Mg Alloy Using Synchrotron X-ray Diffraction

Investigation on enhancing strength and ductility of as-cast Mg-Gd-Y-Zn-Zr alloy by fine-tuning Zn/RE ratio

The Element Features and Criterion of Formation of Lpso in Magnesium Alloys

Localized dislocation interactions within slip bands and crack initiation in Mg-10Gd-3Y-0.3Zr alloy