Abstract:Highlights • Evolution law of long-period stacking ordered phase (LPSO) in Mg-Gd-Y-Zn alloy and its effect on mechanical properties were investigated. • First-principles calculations for 14H and 18R LPSO phases regarding thermodynamic and mechanical properties were carried out. • Superlattice structure of the LPSO phase folds the fermi surface of the brillouin zone, resulting in an increase in the elastic modulus of the LPSO phase. • Long-range interactions caused by the LPSO phase play a crucial role in suppressing dislocation motion. Based on experiments and first-principles calculations, the microstructures and mechanical properties of as-cast and solution treated Mg-10Gd-4Y-xZn-0.6Zr ( x = 0, 1, 2, wt.%) alloys are investigated. The transformation process of long-period stacking ordered (LPSO) structure during solidification and heat treatment and its effect on the mechanical properties of experimental alloys are discussed. Results reveal that the stacking faults and 18R LPSO phases appear in the as-cast Mg-10Gd-4Y-1Zn-0.6Zr and Mg-10Gd-4Y-2Zn-0.6Zr alloys, respectively. After solution treatment, the stacking faults and 18R LPSO phase transform into 14H LPSO phase. The Enthalpies of formation and reaction energy of 14H and 18R LPSO are calculated based on first-principles. Results show that the alloying ability of 18R is stronger than that of 14H. The reaction energies show that the 14H LPSO phase is more stable than the 18R LPSO. The elastic properties of the 14H and 18R LPSO phases are also evaluated by first-principles calculations, and the results are in good agreement with the experimental results. The precipitation of LPSO phase improves the tensile strength, yield strength and elongation of the alloy. After solution treatment, the Mg-10Gd-4Y-2Zn-0.6Zr alloy has the best mechanical properties, and its ultimate tensile strength and yield strength are 278.7 MPa and 196.4 MPa, respectively. The elongation of Mg-10Gd-4Y-2Zn-0.6Zr reaches 15.1, which is higher than that of Mg-10Gd-4Y0.6Zr alloy. The improving mechanism of elastic modulus by the LPSO phases and the influence on the alloy mechanical properties are also analyzed.

A new insight into LPSO phase transformation and mechanical properties uniformity of large-scale Mg-Gd-Y-Zn-Zr alloy prepared by multi-pass friction stir processing

Deformation-induced Dynamic Precipitation of 14H-LPSO Structure and Its Effect on Dynamic Recrystallization in Hot-Extruded Mg-Y-Zn Alloys

Local Lattice Distortion Mediated Formation of Stacking Faults in Mg Alloys

Effects of Bulk LPSO Phases on Mechanical Properties and Fracture Behavior of As-Extruded Mg-Gd-Y-Zn-Zr Alloys

Transformation of long-period stacking ordered structures in Mg-Gd-Y-Zn alloys upon synergistic characterization of first-principles calculation and experiment and its effects on mechanical properties

Effect of the Morphology of Long-Period Stacking Ordered Phase on Mechanical Properties and Corrosion Behavior of Cast Mg-Zn-Y-Ti Alloy

Dissolution and Reprecipitation of 14H-LPSO Structure Accompanied by Dynamic Recrystallization in Hot-Extruded Mg89Y4Zn2Li5 Alloy

In-situ investigate on the microstructure evolution, deformation and fracture mechanism of Mg-Gd-Zn-Mn alloy with varies of LPSO volume fraction

Deformation behavior of LPSO phases with regulated morphology and distribution and their role on dynamic recrystallization in hot-rolled Mg-Gd-Y-Zn-Zr alloy

The Role of Long Period Stacking Ordered Phase in Dynamic Recrystallization of a Mg–Gd–Y–Zn–Zr Alloy during Multi-Directional Forging Process

Unveiling the strengthening effect of LPSO phase in a Mg-Y-Zn alloy

Achieving Enhanced Mechanical Properties of Extruded Mg-Gd-Y-Zn-Zr Alloy by Regulating the Initial LPSO Phases

Decreasing the mechanical anisotropy of the forged Mg-8.5Gd-2.5Y-1.5Zn-0.5Zr alloy by modulating blocky LPSO particles using multi-directional forging

Micro-nano structure characteristics and texture evolution of the friction stir processed dual-phase Mg Li alloy

Effect of the interspacing of intragranular lamellar LPSO phase on dynamic recrystallization behaviors of Mg-Gd-Y-Zn-Zr alloys

Texture, microstructure and mechanical properties of an extruded Mg-10Gd-1Zn-0.4Zr alloy: Role of microstructure prior to extrusion

Effects of an LPSO Phase Induced by Zn Addition on the High-Temperature Properties of Mg-9Gd-2Nd-(1.5Zn)-0.5Zr Alloy

Multi-pass submerged friction stir processing of AZ61 magnesium alloy: strengthening mechanisms and fracture behavior

Recent Advances in LPSO-Containing Wrought Magnesium Alloys: Relationships Between Processing, Microstructure, and Mechanical Properties

The Effect of Morphology of the Long-Period Stacking Ordered Phase on Mechanical Properties of the Mg-7Gd-3Y-1Nd-1Zn-0.5Zr (wt.%) Alloy

Fragmentation of 18R LPSO phases through multi-pass equal channel angular pressing and its impact on rollability of Mg97Y2Zn1 (at%) alloy