Abstract:The flow behavior of the powder layer significantly affects subsequent dynamic behavior and final quality of the parts fabricated via powder bed-based additive manufacturing. High powder layer quality is the key scientific problem and technical difficulty, however, the dynamic flow behavior of powder particles and its relationship between powder layer quality were not well understood. In this paper, the influences of typical factors including process parameters (relative layer height and blade velocity) and powder properties (particle size and surface energy coefficient) on powder layer quality of polyamide 6 were systematically investigated by discrete element method to understand the mechanism of the powder layer packing behavior at the particle scale. The packing density, structure uniformity, normalized layer thickness, and surface uniformity were introduced to quantitatively characterize the powder layer quality. The mechanisms at the particle scale, including the blocking of particle, force arch, particle velocity distribution, and cohesion effect were discussed in detail. The results showed that a decreasing value particle size/layer height can effectively weaken the blocking effect of particles, improving the continuity and stability of powder flow and inducing a dense and uniform powder layer. The particles with high average velocity in the gap between the blade and baseplate will move forward after the blade leaves, significantly reducing the layer thickness and packing density. Meanwhile, the cohesion force was determined by the particle size and surface energy coefficient, and the cohesion effect dominated the flow behavior of the particles with a small particle size d = 10μm or a large surface energy coefficient γ = 0.2mJ/m2. These findings can provide useful guidance in understanding the flow behavior at the particle scale and improving the powder layer quality.

A Comprehensive Review of Characterization Techniques for Particle Adhesion and Powder Flowability

Research Progress of Granular Flow and Fluidization Behavior of Coarse Cohesive Particles

A Comparative Analysis of Techniques for Characterizing Particle-Scale Adhesion and Cohesion

A mechanistic framework for the characterisation of cohesive, frictional and interlocking effects on powder flow behaviour

Cohesive Powder Flow: Trends and Challenges in Characterisation and Analysis

Characterization Techniques for Determining Flow Property of Powder in Powder Coating Process

Characterization of Non-Newtonian Rheological Behaviors of Powders

Comprehensive evaluation of powder flowability for additive manufacturing using principal component analysis

Validation of Surface Coating with Nanoparticles to Improve the Flowability of Fine Cohesive Powders

Investigation on Characterization of Powder Flowability Using Different Testing Methods

Characterization and flowability methods for metal powders

Adhesive Particulate Flow: the Discrete-Element Method and Its Application in Energy and Environmental Engineering

The Effect of Process Conditions on Powder Flow Properties for Slow Flow Regimes

Modeling and characterization of cohesion in fine metal powders with a focus on additive manufacturing process simulations

Effect of Characterization of Powder on Particle Velocity in Dense-Phase Pneumatic Conveying

Review on the Research Techniques about the Adhesion Mechanisms of Metals/Polymer Coatings

Experimental and Calculational Study on Effects of Flow Additive on Flowability of Fine Coating Particles

Characterization of Powder to Assess Dense Phase Pneumatic Conveying

Integrating Particle Microstructure, Surface and Mechanical Characterization with Bulk Powder Processing

Recent Advances in Studies of Wet Particle Fluidization Characteristics

Numerical simulation of the flow behavior and powder spreading mechanism in powder bed-based additive manufacturing