Abstract:Purpose For additive manufacturing (AM) through laser-based powder bed fusion of polymers (PBF-LB/P), accurate characterization of powder flowability is vital for achieving high-quality parts. However, accurately characterizing feedstock flowability presents challenges because of a lack of consensus on which tests to perform and the diverse forces and mechanisms involved. This study aims to undertake a thorough investigation into the flowability of eight feedstock materials for PBF-LB/P at different temperatures using various techniques. Design/methodology/approach For ambient temperature assessments, established metrics such as avalanche angle and Hausner ratio, along with the approximated flow function coefficient (FFC app ), are used. The study then focuses on the influence of elevated temperatures representative of in-process conditions. FFC app and differential scanning calorimetry (DSC) are performed and analyzed, followed by a correlation analysis as a holistic approach to identify key aspects for flowability. Furthermore, two feedstock materials are compared with a previous study to connect the present findings to PBF-LB/P processing. Findings The study revealed intrinsic material properties such as mechanical softening near the melting point to become significant. This partially explains why certain powders with poor ambient temperature flowability are consistently demonstrated to produce high-quality parts. FFC app and thermal characterization through DSC are identified as critical metrics for optimizing feedstock material characteristics across temperature ranges. Originality/value Previous studies emphasized specific characterizations of feedstock material at ambient temperature, presented a limited materials selection or focused on metrics such as shape factors. In contrast, this study addresses a partially understood aspect by examining the critical role of temperature in governing feedstock material flowability. It advocates for the inclusion of temperature variables in flowability analyses to closely resemble the PBF-LB/P process, which can be applied to material design, selection and process optimization.

Comprehensive evaluation of powder flowability for additive manufacturing using principal component analysis

Controlling factors determining flowability of powders for additive manufacturing: A combined experimental and simulation study

Experimental approach for development of a powder spreading metric in additive manufacturing

Powder flowability characterisation at preheating temperature in additive manufacturing

A Computer Vision Approach to Evaluate Powder Flowability for Metal Additive Manufacturing

Effect of powder morphology on flowability and spreading behavior in powder bed fusion additive manufacturing process: a particle-scale modeling study

Quantitative Characterization of Metal Powder Morphology, Size Distribution, and Flowability for Additive Manufacturing

Numerical simulation of the flow behavior and powder spreading mechanism in powder bed-based additive manufacturing

A mechanistic framework for the characterisation of cohesive, frictional and interlocking effects on powder flow behaviour

Revealing Particle-Scale Powder Spreading Dynamics in Powder-Bed-based Additive Manufacturing Process by High-Speed X-Ray Imaging

Powder deposition mechanism during powder spreading with different spreader geometries in powder bed fusion additive manufacturing

Cohesive Powder Flow: Trends and Challenges in Characterisation and Analysis

Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes

Quantitative analysis of thin metal powder layers via transmission X-ray imaging and discrete element simulation: Roller-based spreading approaches

Validation of Surface Coating with Nanoparticles to Improve the Flowability of Fine Cohesive Powders

Decoding powder flowability: Machine learning pioneers the analysis of particle-size distribution effects

Correlation analysis of feedstock flowability and temperature for laser-based powder bed fusion of polymers

Additive Manufacturing: Assessing Metal Powder Quality Through Characterizing Feedstock and Contaminants

Techniques to Determine Powder Flow Properties

Effect of particle surface roughness on the flowability and spreadability of Haynes 230 powder during laser powder bed fusion process

Numerical Simulation of Gas Atomization and Powder Flowability for Metallic Additive Manufacturing