Abstract:Chemical recycling of plastic waste via thermochemical processes is essential to move to a carbo-circular economy, reducing our dependence of fossil resources. However, recovering monomers from polyolefins in one or multiple steps is challenging due to their chemical inertness. In the present work, a tandem micro-pyrolyzer coupled to comprehensive two-dimensional gas chromatography and FID/ToF-MS detectors was utilized to study the performance of industrial formulations of steam-treated FCC catalysts and HZSM-5 additives for the in-line catalytic upgrading of polyolefin pyrolysis products towards light olefins and aromatics in two steps. When upgrading pyrolysis vapors from LDPE over the steam-treated catalysts at 600 °C, CH4 yields did not exceed 0.5 wt% due to their low acidity. The FCC catalyst formulations obtained higher yields of C5-C11 aliphatics (up to 42 wt%) and were more active in converting C12 + products than the HZSM-5-containing additives. The highest C2-C4 olefin selectivity of 53 wt% was obtained using a bare steam-treated HZSM-5 additive. With this catalyst, at higher catalyst loading and temperature (700 °C), the light olefin yield reached 69 wt% (19% ethylene, 22% propylene, 10% 1,3-butadiene, and 18% other C4 olefins). Importantly, similar yields of light olefins with even higher propylene yields of 31 wt% were obtained when processing real post-consumer mixed polyolefin waste. An adjusted loading of unsteamed catalyst (to obtain a similar level of initial conversion of C12 + products) showed higher coking propensity and deactivated more rapidly than its steam-treated version. The research results show great potential for the pyrolysis of mixed polyolefin waste followed by the direct in-line upgrading of the pyrolysis vapors to produce high value base chemicals such as C2-C4 olefins, aromatics, and naphtha-range aliphatics at high selectivity while limiting formation of coke, CH4, and H2.

Polystyrene Waste Thermochemical Hydrogenation to Ethylbenzene by a N-Bridged Co, Ni Dual-Atom Catalyst

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

Recycling benzene and ethylbenzene from in-situ catalytic fast pyrolysis of plastic wastes

Recycling Valuable Alkylbenzenes from Polystyrene through Methanol‐Assisted Depolymerization

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

Pyrolysis-plasma/catalytic reforming of post-consumer waste plastics for hydrogen production

Hydrogen and aromatics recovery through plasma-catalytic pyrolysis of waste polypropylene

Maximizing light olefins and aromatics as high value base chemicals via single step catalytic conversion of plastic waste

Cascade degradation and upcycling of polystyrene waste to high-value chemicals

Steam reforming of polystyrene at a low temperature for high H2/CO gas with bimetallic Ni-Fe/ZrO2 catalyst

2Supercritical CO2-promoted Degradation of Polystyrene to Aromatic Oils with NiO@C Catalyst

Heterogeneous oxidative upcycling of polystyrene plastics to benzoic acid under air conditions

Polyolefin waste to light olefins with ethylene and base-metal heterogeneous catalysts

Solar pyrolysis of waste plastics with photothermal catalysts for high-value products

Catalytic oxidation of polystyrene to aromatic oxygenates over a graphitic carbon nitride catalyst

Complete Hydrogenolysis of Mixed Plastic Wastes

Supercritical CO 2 -promoted degradation of polystyrene to aromatic oils with NiO@C catalyst

A Thermo-Catalytic Pyrolysis of Polystyrene Waste Review: A Systematic, Statistical, and Bibliometric Approach

Synthesis and Application of ZSM-5 Catalyst Supported with Zinc and/or Nickel in the Conversion of Pyrolytic Gases from Recycled Polypropylene and Polystyrene Mixtures under Hydrogen Atmosphere

Hydrogen Production by Steam Reforming of Pyrolysis Oil from Waste Plastic over 3 wt.% Ni/Ce-Zr-Mg/Al2O3 Catalyst