Abstract:The increasing rates of plastic production and waste plastic accumulation pose a serious challenge to the society, environment, and economy. Current mechanical recycling process is limited by the sorting/pretreatment of plastic waste and degradation of plastics during the process, which calls for more efficient recycling strategies. Catalytic microwave-assisted pyrolysis could serve as a feasible approach to chemical recycling of waste plastics and producing fuel and petrochemical feedstocks such as naphtha. This lecture presents a series of our recent work on the aspects of pyrolysis reactor design and catalyst development with the goal of advancing this technology towards industrial applications. A lab-scale continuous microwave-assisted pyrolysis system with a processing capacity of 200 kg plastics per day was developed, which features continuous downdraft operation and a mixing ball bed reactor. The incorporation of silicon carbide as microwave absorbents into the microwave heating process enabled fast, uniform and energy-efficient heating for the process. A baseline test of the system using conventional ZSM-5 catalyst obtained a 57 wt.% yield for C5-C22 liquid hydrocarbons from polyolefin-based plastics. Energy saving of the process compared to production of similar products from virgin materials was estimated to be 32% by using the Materials Flows through Industry supply chain analysis tool. In order the improve the yield and quality of the liquid hydrocarbon products, a series of catalysts were tested and compared on a lab-scale setting. Notably, relay catalysis of Al2O3 followed by ZSM-5 achieved up to 100% conversion into monoaromatics and C5-C12 alkanes/olefins at a catalyst to plastic ratio of 4:1; Y5.1, F20 zeolites and Al2O3 promoted the production of alkanes and alkenes mainly in the C5-C23 range; MCM-41 led to the formation of C13C23 alkanes and alkenes with a selectivity of 86.6%; ZSM-5 favored the production of aromatics with a selectivity of 70%. In addition to developing and selecting the proper catalyst material, the catalytic reactor also needs to be carefully designed such that sufficient heat and mass transfer within the catalyst bed is ensured during operation and the catalyst regeneration procedure can be conveniently practiced. Conventional designs such as the randomly packed bed could be problematic in the process since catalyst deactivation and coke/wax build-up is very likely. A probable solution to this issue is a structured catalytic reactor consisting of a structured packing with coated catalysts, e.g. ZSM-5 coatings on a SiC foam support. This structured catalyst has been tested in a lab-scale setting for upgrading pyrolytic vapours and results showed that it outperformed many other catalytic reactor designs in terms of catalytic activity and stability. In addition, the composite catalysts could be regenerated and reused while well preserving its material properties and catalytic activity after multiple reaction-regeneration cycles.

Solar pyrolysis of waste plastics with photothermal catalysts for high-value products

Photo-thermal catalytic pyrolysis of waste plastics: Investigation into light-induced metal-support interaction

Photothermal recycling of waste polyolefin plastics into liquid fuels with high selectivity under solvent-free conditions

Pyrolysis-catalysis of different waste plastics over Fe/Al2O3 catalyst: High-value hydrogen, liquid fuels, carbon nanotubes and possible reaction mechanisms

Catalytic pyrolysis of film waste over Co/Ni pillared montmorillonites towards H2 production

Highly efficient photothermal catalytic upcycling of polyethylene terephthalate via boosted localized heating

Solar-driven reforming of waste polyester plastics into hydrogen over CdS/NiS catalyst

Catalyst-mediated pyrolysis of waste plastics: tuning yield, composition, and nature of pyrolysis oil

Temperature-Dependent Nifeal Catalysts for Efficient Microwave-Assisted Catalytic Pyrolysis of Polyethylene into Value-Added Hydrogen and Carbon Nanotubes

Thermo-catalytic conversion of waste plastics into surrogate fuels over spherical activated carbon of long-life durability

A review on catalytic pyrolysis of plastic wastes to high-value products

Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries

Complete Hydrogenolysis of Mixed Plastic Wastes

Hydrogen and aromatics recovery through plasma-catalytic pyrolysis of waste polypropylene

Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste

Jet Fuel and Hydrogen Produced from Waste Plastics Catalytic Pyrolysis with Activated Carbon and MgO

Catalytic microwave-assisted pyrolysis for chemical recycling of plastic waste

Enhancing light fuel production through catalytic pyrolysis of municipal mixed plastic waste over activated spent FCC catalyst

Maximizing light olefins and aromatics as high value base chemicals via single step catalytic conversion of plastic waste

Simultaneous Hydrogen Production and Conversion of Plastic Wastes into Valued Chemicals over a Z-scheme Photocatalyst

Highly Active Biphasic Anatase-Rutile Ni-Pd/TNPs Nanocatalyst for the Reforming and Cracking Reactions of Microplastic Waste Dissolved in Phenol