Abstract:Aluminium silicon carbide (AlSiC) composites are silicon carbide (SiC) ceramic-reinforced aluminium matrix composites. When wide band-gap semiconductors, typically silicon carbide (SiC) and gallium nitride (GaN), work at high power density and high operating temperature, AlSiC is usually used as the thermal management material to dissipate a large amount of heat accumulated in the devices, thus reducing equipment failures caused by thermal runaway. Wetting is an important property to be considered because it can affect the heat transfer performance of AlSiC. The purpose of this work was to study the influence of 3 C-SiC crystalline orientation on the wetting behaviour of molten aluminum droplets through molecular dynamics simulation. The density distribution of Al droplets obtained on the (110) plane was stratified, while on the (111) plane, a relatively dense spindle region appeared. The physical quantities associated with the wettability of aluminium droplets on the (110) and (111) planes were also analysed. The contact angles on these two crystal planes obtained after fitting were 84.3° and 95.3°, respectively. The droplet exhibits a wetting state on the (110) plane while presenting characteristics between wetting and hydrophobicity on the (111) plane. The magnitude of the interface energy fluctuation of the (110) system was between − 17 kJ/mol and − 27 kJ/mol which was less than that of the (111) system. In the time step 2.85 × 10 5 fs before and after fitting, the average self-diffusion coefficients of aluminium droplets in the (111) system increased by 2.29 × 10 −8 and 1.9 × 10 −7 m 2 /s compared with those in the (110) system. Although it was more difficult for molten aluminium to diffuse on the (110) plane, it took longer time for the (111) system to reach stability. This further showed that the role of the 3 C-SiC crystalline orientation on droplet wettability cannot be ignored. Therefore, understanding the influence of crystal orientation on the wetting characteristics of AlSiC during its preparation is helpful for improving its heat transfer performance, and to ensure the reliable operation of wide band-gap semiconductor devices.

Wettability and Interfacial Reactions in Al–mg–Si/SiC and Al–mg–Si/SiO2 Systems

Wettability At Al-Mg/Cerarnic Interfaces

Interfacial reaction between the oxidized SiC particles and Al-Mg alloys

Role of Si in the wetting of TiC by Al

Wettability And Its Improvement At Ai/Sic Interfaces

Effect on Wetting Properties of the Al-Ti System by the Addition of Different Alloying Elements

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Reinforcing Al matrix composites by novel intermetallic/SiC interface and transition structure

Study on the Influence of Ce and Mg on the Interface Behavior of SiC_p/Al Composites

Effect of Interfacial Reaction on Mechanical Behavior of SiCw/AZ91 Magnesium Matrix Composites

Interfacial Modification and Performance Enhancement of Carbon Matrix/aluminum Composites

Work of Adhesion in Al/SiC Composites with Alloying Element Addition

Study of the 3C-SiC surface crystalline orientation effect on the wettability of molten aluminium droplets by molecular dynamics simulation

Microstructure and mechanical properties of SiC reinforced AlSi10Mg composites fabricated by laser metal deposition

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Investigations on Interface Reactions and Wettability Between Melt Superalloys and Ceramic Materials

Crystal Chemistry at Interfaces Between Liquid Al and Polar SiC{0001} Substrates

Effect of Α-Al2o3 Coatings on the Interface of Ni/SiC Composites Prepared by Electrodeposition

The effect of Si upon the interfacial reaction characteristics in SiCp/Al-Si system composites during multiple-remelting

Wetting and Interfacial Behavior of Molten Al on Mo-Ni(Co)-Si Coated SiC Ceramic

Mechanical Properties of Interfaces between Mg and SiC: An Ab Initio Study