Abstract:The bottleneck problems of SiC particles reinforced AlSi10Mg composites (SiC/AlSi10Mg) prepared by traditional casting method, such as composition segregation, interface reaction and coarse microstructure, can be effectively improved by powder metallurgy with lower processing temperature. In this study, the influence of SiC particle size and content on the properties of SiC/AlSi10Mg was systematically analyzed. SiC/AlSi10Mg composites were prepared by planetary ball milling, spark plasma sintering (SPS) and hot extrusion composite preparation process. The obtained composites presents dense microstructure without the formation of interfacial reaction phase. The distribution of micron SiC particles (μm-SiC) in the matrix is relatively uniform, and nano SiC particles (nm-SiC) slightly agglomerates with the increase of the content. The strength of SiC/AlSi10Mg increases with the increase of nm-SiC content, which is mainly attributed to dispersion strengthening, dislocation strengthening and grain refinement strengthening. The strength of SiC/AlSi10Mg hardly changes with the increase of μm-SiC content, but the elongation decreases gradually. The deformation between μm-SiC and AlSi10Mg matrix is not coordinated and μm-SiC cleave the AlSi10Mg matrix. The irregular boundaries of μm-SiC are easy to produce stress concentration during loading, leading to interface cracking or μm-SiC fracture. Therefore, μm-SiC are difficult to play a significant strengthening effect to composites. With the increase of SiC content, the fracture mechanism of composites gradually changes from ductile fracture to brittle fracture in SiC agglomeration region. This study lays a theoretical and experimental foundation for the controllable preparation and performance optimization of high strength and toughness AMCs reinforced by SiC particles.

The effect of Si upon the interfacial reaction characteristics in SiCp/Al-Si system composites during multiple-remelting

Effect of silicon-carbide volume fraction upon interface reaction in SiCp/Al composites

Chemical reaction of SiCp/Al composites during multiple remelting

The interfacial reaction characteristics in SiC/Al composite above liquidus during remelting

Interfacial reaction of Al matrix composites reinforced with TiO2-coated SiC particles during remelting

Chemical reaction in Al matrix composite reinforced with SiCp coated by SnO2

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

The Melt Structural Characteristics Concerning the Interfacial Reaction in SiC(p)/Al Composites

THE DISTRIBUTION AND THE DIFFUSION OF Si ABOVE THE LIQUIDUS IN SiCp / Al COMPOSITE

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Solidification behavior of SiCw/Al-18Si composites

Interfacial reaction between the oxidized SiC particles and Al-Mg alloys

The melt structures above the liquidus in SiCp/Al composite

Effect of Silicon Addition and Thermal History on the Thermal Expansion Behavior of Sic/Al Composites

Particle agglomeration and mechanical properties of SiCp/Al-Si composites

Recycling Mechanism of Discontinuously Reinforced Al Matrix Composites

Effect of Thermal Exposure on the Interface Microstructure and Interfacial Shear Strength of the SiC Fiber Reinforced AlFe5Si2 Matrix Composite

Interfacial reactions between polymer derived SiC fiber and Ti 3Si(Al)C2

Interface Stability of the Sic Particles/Fe Matrix Composite System

Effect of Pressure on the Solidification Behavior and Mechanical Properties of SiCp/Al-Mg Composites

Influence of characteristic parameters of SiC reinforcements on mechanical properties of AlSi10Mg matrix composites by powder metallurgy