Abstract:High consumption of acids and reductants is usually required when spent lithium-ion batteries are recycled using a hydrometallurgy route. The overstoichiometric chemicals end up as pollutants that have to be further treated. Low chemical and energy consumption have attracted considerable attention to achieve sustainability of a recycling process. In this research, LiFePO4 was used as a reductant and induced crystallization was performed for the removal of Fe and P. More importantly, we demonstrate that it is possible to achieve additional reductant-free and near-to-stoichiometric acidic recovery of spent ternary lithium-ion batteries (NCMs) by introducing FePO4·2H2O seed crystals and using waste LiFePO4. High efficiencies (>96%) of critical metals including Ni, Co, Mn, and Li are achieved, while iron phosphate remains as a solid product. Then, the leaching solution can be further used for the Ni–Co–Mn hydroxide precursor and lithium carbonate preparation. In addition, the mechanisms were subsequently investigated by combining thermodynamics analysis and systematic characterizations. This entire recycling process can be a highly economic, closed-loop alternative for recovering valuable metals from spent lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08163?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08163</a>.Detailed results of different parameters on synergistic leaching; reuse of leaching residues as seed crystals; leaching efficiencies of different types of NCM cathode wastes; SEM micrographs of the Ni–Co–Mn hydroxide precursor and leaching residues at different times (0.5–4 h); mass fraction of Li2CO3 precipitation and FePO4·2(H2O) residues; and thermodynamic data and equilibrium equations relative to the E–pH diagram of the Li–Fe–P–H2O system (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08163/suppl_file/sc0c08163_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Clean and Efficient Lithium Recovery from Waste Electrolytes Via an Environmentally Short Process

Clean Process for Selective Recovery of Lithium Carbonate from Waste Lithium-Bearing Aluminum Electrolyte Slag

Efficient Lithium Recovery from Lithium-Containing Spent Aluminium Electrolyte Via NaF Fluorination Roasting and Al2(SO4)3 Leaching

Stepwise extraction of lithium and potassium and recovery of fluoride from aluminum electrolyte wastes through calcification roasting-two-stage leaching

Acid-Free and Selective Extraction of Lithium from Spent Lithium Iron Phosphate Batteries Via a Mechanochemically Induced Isomorphic Substitution

Selective preparation of lithium carbonate from overhaul slag by high temperature sulfuric acid roasting - Water leaching

Study on Recovery of Lithium from Lithium-Containing Aluminum Electrolyte

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Efficient lithium recovery from electrolytic aluminum slag via an environmentally friendly process: Leaching behavior and mechanism

An Effective Relithiation Process for Recycling Lithium‐Ion Battery Cathode Materials

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

High-efficiency leaching process for selective leaching of lithium from spent lithium iron phosphate

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

Efficient Extraction of Lithium from Anode for Direct Regeneration of Cathode Materials of Spent Li-Ion Batteries

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

Economical Recycling Process for Spent Lithium-Ion Batteries and Macro- and Micro-Scale Mechanistic Study

Sustainable Recovery of Cathode Materials from Spent Lithium-Ion Batteries Using Lactic Acid Leaching System

Selective recycling of lithium from spent lithium-ion batteries by carbothermal reduction combined with multistage leaching

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Dry Grinding - Carbonated Ultrasound-Assisted Water Leaching of Carbothermally Reduced Lithium-Ion Battery Black Mass Towards Enhanced Selective Extraction of Lithium and Recovery of High-Value Metals

Universal and efficient extraction of lithium for lithium-ion battery recycling using mechanochemistry