Abstract:Abstract According to the report published by the International Energy Agency (IEA), active space cooling and air conditioning systems consume approximately 16% of the building sector’s final electricity consumption and contribute 3.94% of global greenhouse gas emissions. In this regard, the use of low-cost but effective passive solutions, such as organic phase change materials (PCM) on the building envelope, can provide high thermal mass and thus can lower the temperature fluctuation inside the building. In the current study, the potential of PCM-enhanced building envelopes to enhance thermal comfort has been studied. The study has been performed using the conduction finite difference (ConFD) algorithm in EnergyPlus software. A comparative study has been done for a traditional reinforced cement concrete (RCC) reference test room of size (5m x 6m x 3m) and another room of the same size with PCM-enhanced walls for the hot and humid climate zone of Guwahati (latitude 26.1, longitude 91.7), in India. A PCM thickness of 20 mm is used at the external surface of the wall between the red clay burnt brick (120 mm in thickness) and the cement plaster (25mm thick). The PCM used for the study is a biocomposite PCM, named WH-PCM, with a melting point of 31.5°C and thermal conductivity of 0.27 W/mK. The simulation results reveal that the R-value of the external wall of the room with PCM walls has been increased by 84.90% compared to the reference room with the incorporation of WH-PCM, resulting in a mean zone temperature difference of 0.3°C throughout the year. Also, the indoor thermal discomfort hours have been annually reduced by 15.82% with the use of WH-PCM when compared with the reference room. A similar temperature difference trend, which is 1.93°C, is also observed in the single PCM brick experimental result under identical testing conditions as a regular brick of the same size.

Performance of a Curved Corrugated Surface Trombe Wall Coupled Phase Change Material in Buildings by Numerical Models and Experiments

Numerical Investigations on Performance of Phase Change Material Trombe Wall in Building

Enhancing indoor thermal comfort and energy efficiency: A comparative study of RC-PCM Trombe wall performance

The Trombe Wall Equipped with PCMs for the Enhancement of the Indoor Thermal Quality

Numerical Study on Thermal Performance of PCM Trombe Wall

Study on the thermal performance of a new double layer PCM trombe wall with multiple phase change points

CFD Modeling and Experimental Validation of the Thermal Performance of a Novel Dynamic PCM Trombe Wall: Comparison with the Companion Static Wall with and Without PCM

Performance study of a phase change material Trombe wall system in summer in hot and humid area of China

Effect of key parameters on the transient thermal performance of a building envelope with Trombe wall containing phase change material

Coupling Optimization Study of Key Influencing Factors on PCM Trombe Wall for Year Thermal Management

Investigation on heating performance of an integrated phase change material Trombe wall based on state space method

Numerical Study on the Thermal Performance of Phase Change Materials Wall by Radiative Cooling

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

Multi-scale Simulation Study on the Heat Transfer Characteristics of Phase-Change Walls

Experimental and Numerical Performance Analysis of an Active Cooling Wall Module Equipped with Micro-encapsulated Phase Change Material

A parametric model on thermal evaluation of building envelopes containing phase change material

Effects of the position and melting point of the PCM layer on the comprehensive thermal performance of a Trombe wall under mixed dry climate

Parametric and Optimization Analyses of a Dynamic Trombe Wall Incorporating PCM to Save Heating Energy under Cold Climate Zones

Experimental study on thermal performance of an integrated PCM Trombe wall

Numerical Study on the Cooling Performance of a Novel Passive System: Cylindrical Phase Change Material-Assisted Earth-Air Heat Exchanger

CLIMA 2019-Modelling Study on Pipe-Encapsulated PCM Wall System for Building Insulation and Active Heat Removal