Abstract:As the heating demands of buildings drop considerably, the use of solar walls makes increasing sense. One of the obstacles to the development of such walls is their need for on-site implementation by specialized companies. On the other hand, a storage wall is generally composed of heavy materials with high inertia, which prevents prefabrication of the solar component. To avoid this problem and allow for solar walls to be prefabricated in the factory, a novel approach to replacing this heavy wall with a lighter storage wall incorporating phase change materials (PCM) has been proposed. This paper aims to demonstrate the impact of PCM on the thermal energy performance once they have been integrated into the storage wall of the composite Trombe wall. Addressed herein will be the heat transfer exchange inside a house located in the northern part of France, where a composite Trombe wall has been fitted without PCM. Three configurations will be investigated—(1) the model house without the solar Trombe wall, defined as the reference configuration; (2) the model house integrating the concrete solar Trombe wall; and (3) the model house integrating the PCM solar Trombe wall. Two setpoint temperatures will be introduced—(a) a constant setpoint of 20 °C, and (b) a variable setpoint of 19 °C (14 h from 7:00 a.m. to 9:00 p.m.) and 16 °C (10 h from 9:00 p.m. to 7:00 a.m.). Furthermore, three different climate conditions will be adopted to run simulations—Paris-Orly, Lyon, and Nice. Dymola/Modelica, a dynamic thermal simulation tool, will be utilized to simulate the thermal performance of these defined configurations. The results obtained, regarding a solar Trombe wall installation that applies two distinct storage walls exposed to the weather of Paris, showed similar minimizations of the one-year energy heating demand inside the bedroom, equal to roughly 20% (i.e., 20.45% of concrete storage wall and 19.90% of PCM storage wall) compared to the reference configuration (i.e., the house with no solar Trombe wall). Based on the imposed setpoint temperature by means of night and day reductions, the resulting heating energy demand in the bedroom, through application of the two storage walls (concrete and PCM) and three different climatic regions could be minimized by 20.34% in Paris, 20.20% in Lyon, and 68.10% in Nice (for the concrete storage wall) vs. the reference configuration; and by 18.79% in Paris, 19.56% in Lyon, and 55.15% in Nice (for the PCM storage wall) vs. the reference configuration.

Coupling Optimization Study of Key Influencing Factors on PCM Trombe Wall for Year Thermal Management

Effects of the position and melting point of the PCM layer on the comprehensive thermal performance of a Trombe wall under mixed dry climate

Numerical Simulation on the Thermal Performance of a PCM-containing Ventilation System with a Continuous Change in Inlet Air Temperature

Study on the thermal performance of a new double layer PCM trombe wall with multiple phase change points

The Trombe Wall Equipped with PCMs for the Enhancement of the Indoor Thermal Quality

Enhancing indoor thermal comfort and energy efficiency: A comparative study of RC-PCM Trombe wall performance

Investigation on heating performance of an integrated phase change material Trombe wall based on state space method

Effect of key parameters on the transient thermal performance of a building envelope with Trombe wall containing phase change material

Experimental study on thermal performance of an integrated PCM Trombe wall

Effects of the PCM layer position on the comprehensive performance of a built-middle PV-Trombe wall system for building application in the heating season

Performance study of a phase change material Trombe wall system in summer in hot and humid area of China

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Impact of a Composite Trombe Wall Incorporating Phase Change Materials on the Thermal Behavior of an Individual House with Low Energy Consumption

Thermal Performance Optimization Simulation Study of a Passive Solar House with a Light Steel Structure and Phase Change Walls

Thermal Performance and Optimizing of Composite Trombe Wall with Temperature-Controlled DC Fan in Winter

Taguchi optimization and a fast evaluation method on the transient thermal performance of phase change material outfitted walls

Experimental Study Of Thermal Effect Of Lacquer Coating For Pv-Trombe Wall System Combined With Phase Change Material In Summer

Optimizing the characteristic cooling curves of PCM-integrated thermally active buildings: Experimental and numerical investigations

Enhancing energy efficiency of PCM wall in winter with novel PCM-DLCB coupling design

Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings

A parametric model on thermal evaluation of building envelopes containing phase change material