Abstract:A significant obstacle that persists in the field of membrane-based gas separation is the development of advanced membranes. In this study, a series of thermally rearranged (TR) membrane precursors (6FDA/ODA/6FAP) with gradient concentration of 6FAP was selected for carbon molecular sieve membranes (TR-CMS) formation. The investigation into the structural evolution from polyimide to TR precursor and finally to CMS membrane utilized various characterization techniques to manipulate the relationship between membrane structure formation and their separation performance. Results show that the structural properties of intermediate TR-polymers, strongly influenced by the –OH content, significantly affect the resultant CMS membrane performance. Specifically, a higher –OH concentration in pristine membrane at 450 °C increases chain rigidity and FFV, leading to a more open pore structure and enhanced gas permeability in TR membranes. Interestingly, TR-CMS derived from increased PBO content exhibits a marked decrease in BET surface area, which correlates with improved molecular sieving performance. This can be attributed to the increased PBO content in the precursor, facilitated degradation upon further heating, thus leads to more orderly structure of the resulting CMS, thereby significantly enhanced molecular sieving performance. The TR-CMS-0.5 sample exhibited the most favorable gas separation performance (P H2 = 3843 and P CO2 = 901 Barrer) as well as high H 2 /CH 4 (6 1 0) and CO 2 /CH 4 (1 4 3) selectivity, which exceeded the 2019 Upper bound line. In addition, the TR-CMS-0.5 demonstrates a remarkable mixed-gas CO 2 /CH 4 (50:50) separating performance that far exceeding its 2018 Upper bound line. In conclusion, the adoption of gradient PBO precursors for preparation of CMS membrane materials show great potential for hydrogen recovery and CO 2 removal from natural gas.

Precursor-chemistry Engineering Toward Ultrapermeable Carbon Molecular Sieve Membrane for CO2 Capture

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Carbon Molecular Sieve Membrane with Tunable Microstructure for CO2 Separation: Effect of Multiscale Structures of Polyimide Precursors

High-performance Carbon Molecular Sieving Membrane Derived from a Novel Hydroxyl-Containing Polyetherimide Precursor for CO2 Separations

Carbon Molecular Sieve Membranes Derived from Hydrogen-Bonded Organic Frameworks for CO2/CH4 Separation

Hybrid Carbon Molecular Sieve Membranes Having Ordered Fe3O4@ZIF-8-derived Microporous Structure for Gas Separation

Porous Organic Cage Induced High CO2/CH4 Separation Efficiency of Carbon Molecular Sieve Membranes

Precursors Structural Design and Property of Carbon Membrane for CO2 Capture

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

High-Performance Carbon Molecular Sieve Membrane Derived from a Crown Ether-Containing Co-Polyimide Precursor for Gas Separation

Carbon Molecular Sieve Membranes with Ultra‐Thin Selective Skin Layer by Pyrolysis of Porous Hollow Fibers

Advanced Organic Molecular Sieve Membranes for Carbon Capture: Current Status, Challenges and Prospects

Ultrahigh permeation of CO2 capture using composite organosilica membranes

Ultrapermeable Gel Membranes Enabling Superior Carbon Capture.

High-Performance Carbon Molecular Sieve Membrane Derived from Pek-N Polymer for Co2 Separation

High-performance carbonized ZIF-8-doped hybrid carbon molecular sieve membrane for CO2/N2 separation

Remarkably enhanced molecular sieving effect of carbon molecular sieve membrane by enhancing the concentration of thermally rearranged precursors

Carbon Molecular Sieve Gas Separation Membranes Derived from In-Situ Crosslinked Polyimide Containing Bromine Groups

One-Step Synthesis of Structurally Stable CO2-Philic Membranes with Ultra-High PEO Loading for Enhanced Carbon Capture

Carbon Molecular Sieve Hollow Fiber Membranes Derived from Dip-Coated Precursor Hollow Fibers Comprising Nanoparticles