Abstract:Carbon molecular sieve (CMS) membranes were fabricated by designing the polyimides with different diamine moiety such as PPD, ODA, BAPP and BDAF to investigate the effects of multiscale structures of precursors on the microstructure and CO2 separation performance of the derived CMS membranes. The multiscale structures of polymeric precursor were characterized and simulated in terms of the characteristic of functional groups, the flatness of repeat units, the conformation of single chains, the packing efficiency of multi-chain network and the fractional free volume (FFV) of bulk polymers. The microstructure and CO2 separation performance of derived CMS membrane were characterized by XRD, TEM and gas permeation measurements. The CO2 permeation behavior of CMS membranes derived from different precursors was analyzed. Results indicated that the multiscale structures of polyimides significantly influenced the microstructure and CO2 separation performance of derived CMS membranes. Increased FFV (or reduced flatness of repeat units) in the precursor results in an increased disorder degree of carbon structure in the derived CMS membranes. The CMS membranes prepared by high FFV polyimide with helical chain conformation showed the looser carbon structure that are beneficial to CO2 transport compared with that prepared by polyimide with rod-like chain conformation. The larger size of the pendant functional groups (i.e. V-(CF3)2 > V-(CH3)2) in polyimide results in higher CO2 permeability of the derived CMS membranes. The BDAF-PMDA derived CMS membrane pyrolyzed at 700 degrees C show a high CO2 permeability (0.1 MPa of 50/50 mol.% mixed gas feed) of about 3000 Barrer and moderate CO2/CH4 selectivity, which exhibit an attractive application prospect for CO2 separation.

High-Performance Carbon Molecular Sieve Membrane Derived from Pek-N Polymer for Co2 Separation

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

High-performance Carbon Molecular Sieving Membrane Derived from a Novel Hydroxyl-Containing Polyetherimide Precursor for CO2 Separations

High-Performance Carbon Molecular Sieve Membrane Derived from a Crown Ether-Containing Co-Polyimide Precursor for Gas Separation

High-performance carbonized ZIF-8-doped hybrid carbon molecular sieve membrane for CO2/N2 separation

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

High-performance carbon molecular sieve membrane for C2H4/C2H6 separation: Molecular insight into the structure-property relationships

High-Performance Carbon Molecular Sieve Membranes Derived from a PPA-Cross-linked Polyimide Precursor for Gas Separation

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

Carbon Molecular Sieve Membrane with Tunable Microstructure for CO2 Separation: Effect of Multiscale Structures of Polyimide Precursors

Carbon molecular sieve membranes fabricated at low carbonization temperatures with novel polymeric acid porogen for light gas separation

A review of polymer-derived carbon molecular sieve membranes for gas separation

Porous Organic Cage Induced High CO2/CH4 Separation Efficiency of Carbon Molecular Sieve Membranes

Carbon Molecular Sieve Membranes Derived from Hydrogen-Bonded Organic Frameworks for CO2/CH4 Separation

Carbon Molecular-Sieve Membranes Developed from a Tröger’s Base Polymer and Possessing Superior Gas-Separation Performance

Carbon Molecular Sieve Hollow Fiber Membranes Derived from Dip-Coated Precursor Hollow Fibers Comprising Nanoparticles

Carbon molecular sieve hollow fiber composite membrane derived from PMDA-ODA polyimide for gas separation

Co@NC@ZIF-8-hybridized Carbon Molecular Sieve Membranes for Highly Efficient Gas Separation

Carbon Molecular Sieve Gas Separation Membranes from Crosslinkable Bromomethylated 6FDA-DAM Polyimide

Carbon Molecular Sieve Membranes Derived from Thermally Labile Polymer Containing Blend Polymers and Their Gas Separation Properties

Carbon Molecular Sieve Membranes Derived from Tröger's Base‐Based Microporous Polyimide for Gas Separation