Abstract:A significant obstacle that persists in the field of membrane-based gas separation is the development of advanced membranes. In this study, a series of thermally rearranged (TR) membrane precursors (6FDA/ODA/6FAP) with gradient concentration of 6FAP was selected for carbon molecular sieve membranes (TR-CMS) formation. The investigation into the structural evolution from polyimide to TR precursor and finally to CMS membrane utilized various characterization techniques to manipulate the relationship between membrane structure formation and their separation performance. Results show that the structural properties of intermediate TR-polymers, strongly influenced by the –OH content, significantly affect the resultant CMS membrane performance. Specifically, a higher –OH concentration in pristine membrane at 450 °C increases chain rigidity and FFV, leading to a more open pore structure and enhanced gas permeability in TR membranes. Interestingly, TR-CMS derived from increased PBO content exhibits a marked decrease in BET surface area, which correlates with improved molecular sieving performance. This can be attributed to the increased PBO content in the precursor, facilitated degradation upon further heating, thus leads to more orderly structure of the resulting CMS, thereby significantly enhanced molecular sieving performance. The TR-CMS-0.5 sample exhibited the most favorable gas separation performance (P H2 = 3843 and P CO2 = 901 Barrer) as well as high H 2 /CH 4 (6 1 0) and CO 2 /CH 4 (1 4 3) selectivity, which exceeded the 2019 Upper bound line. In addition, the TR-CMS-0.5 demonstrates a remarkable mixed-gas CO 2 /CH 4 (50:50) separating performance that far exceeding its 2018 Upper bound line. In conclusion, the adoption of gradient PBO precursors for preparation of CMS membrane materials show great potential for hydrogen recovery and CO 2 removal from natural gas.

Porous Organic Cage Induced High CO2/CH4 Separation Efficiency of Carbon Molecular Sieve Membranes

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Carbon Molecular Sieve Membranes Derived from Hydrogen-Bonded Organic Frameworks for CO2/CH4 Separation

High-performance Carbon Molecular Sieving Membrane Derived from a Novel Hydroxyl-Containing Polyetherimide Precursor for CO2 Separations

Assembling ionic liquid into porous molecular filler of mixed matrix membrane to trigger high gas permeability, selectivity, and stability for CO2/CH4 separation

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Hybrid Carbon Molecular Sieve Membranes Having Ordered Fe3O4@ZIF-8-derived Microporous Structure for Gas Separation

Carbon Molecular Sieve Membrane with Tunable Microstructure for CO2 Separation: Effect of Multiscale Structures of Polyimide Precursors

High-Performance Carbon Molecular Sieve Membrane Derived from a Crown Ether-Containing Co-Polyimide Precursor for Gas Separation

High-performance carbonized ZIF-8-doped hybrid carbon molecular sieve membrane for CO2/N2 separation

Enhanced CO2 Selectivities by Incorporating CO2-philic PEG-POSS into Polymers of Intrinsic Microporosity Membrane

High-Performance Carbon Molecular Sieve Membrane Derived from Pek-N Polymer for Co2 Separation

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

Carbon Molecular Sieve Gas Separation Membranes from Crosslinkable Bromomethylated 6FDA-DAM Polyimide

Precursor-chemistry Engineering Toward Ultrapermeable Carbon Molecular Sieve Membrane for CO2 Capture

Mixed-matrix membranes comprising porous organic molecular cage for efficient CO2 capture

Co@NC@ZIF-8-hybridized Carbon Molecular Sieve Membranes for Highly Efficient Gas Separation

Carbon molecular sieve membranes fabricated at low carbonization temperatures with novel polymeric acid porogen for light gas separation

Remarkably enhanced molecular sieving effect of carbon molecular sieve membrane by enhancing the concentration of thermally rearranged precursors

Fine Ultra-Micropore Control Using the Intrinsic Viscosity of Precursors for High Performance Carbon Molecular Sieve Membranes

Enhanced 2-D MOFs nanosheets/PIM-PMDA-OH mixed matrix membrane for efficient CO2 separation