Abstract:As a novel high-entropy ceramic material with a multi-cation and multi-anion sublattice structure, high-entropy carbonitride ceramics (HECNs) have exhibited outstanding comprehensive properties and attracted increasing attention. In this study, a new WC-based cemented carbide material reinforced by high-entropy carbonitride (Ti 0.2 W 0.2 Mo 0.2 V 0.2 Nb 0.2 )(C 0.7 N 0.3 ) (marked as HECN) was successfully fabricated by vacuum hot-pressed sintering. The mutual constraints between hardness and fracture toughness in extant WC-Co cemented carbide tool materials and their deficient high-temperature mechanical properties were effectively addressed. Moreover, for the low efficiency of the traditional carbothermal reduction nitridation, a novel method for rapidly preparing HECN powder was firstly proposed, namely the microwave-assisted carbothermal reduction nitridation, which could accelerate the heating rate and shorten the holding time. Single-phase HECN powder was successfully synthesized by this method, and the impacts of varying HECN content on the room and high-temperature mechanical properties of WC-based cemented carbide were investigated combined with the microstructure analysis by XRD\SEM. The results revealed that HECN effectively inhibited the grain growth of WC in cemented carbide, and the refined WC grains provided a high-volume fraction of grain boundaries, which prevented dislocation movement and increased the hardness. With the optimized HECN content of 10 wt%, the Vickers hardness and fracture toughness of WC-HECN-Co composite reached 21.58 ± 0.36 GPa and 12.27 ± 1.17 MPa∙m 1/2 respectively. Furthermore, WC-10HECN-10Co composites possessed outstanding high-temperature hardness and maintained a high hardness value of 13.16 ± 0.30 GPa at 800 °C, 37% higher than that of WC-10Co. The findings of this research hold significant practical implications for applying cemented carbide cutting tools in high-speed dry cutting.

Unveiling the Role of Carbon Vacancies in Microstructure Evolution and Mechanical Properties of High-Entropy Carbides

Role of carbon vacancies in determining the structural, mechanical, and thermodynamic properties of (HfTaZrNb)C1-x high entropy carbides: a first-principles study

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

Local orders, lattice distortions, and electronic structure dominated mechanical properties of (ZrHfTaM1M2)C (M = Nb, Ti, V)

From stoichiometric to non-stoichiometric high-entropy carbide: a case study of hafnium addition

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Mechanical Properties and Their Sensitivity to Point Defects: (hfnbtatizr)c High-Entropy Carbide

Carbon-deficient High-Entropy (zr0.17nb0.2ta0.2mo0.2w 0.2)C0.89: A Potential High Temperature and Vacuum Wear-Resistant Material

Synthesis and characterization of high-entropy carbide dispersed strengthening tungsten: Mechanical and thermal properties analysis

Study on the rapid synthesis of high-entropy carbonitride powder and its remarkable hardening effects on cemented carbide tool materials

Mechanical properties and high-pressure behavior of high entropy carbide (Mo, Nb, Ta, V, W)C

Synthesis and Mechanical and Elevated Temperature Tribological Properties of a Novel High-Entropy (tivnbmow)c 4.375 with Carbon Stoichiometry Deviation

Superhard bulk high-entropy carbides with enhanced toughness via metastable in-situ particles

The significant influence of carbon content on mechanical and thermal properties of (VNbTaMoW)0.5Cx high entropy carbides

Effect of Carbon Content on Microstructure and Mechanical Properties of Cemented Carbides with Conifecr High Entropy Alloy Binder

Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets

Frist-principles prediction of elastic, electronic, and thermodynamic properties of high entropy carbide ceramic (TiZrNbTa)C

The Effect of Carbon Content on the Microstructure and Mechanical Properties of Cemented Carbides with a CoNiFeCr High Entropy Alloy Binder

Non-stoichiometry of (TiZrHfVNbTa)C x and its significance to the microstructure and mechanical properties

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Carbon Vacancies Enhanced Oxidation Resistance of High-Entropy Carbides (ti0.2v0.2nb0.2mo0.2w0. 2)Cx