Effects of Welding and Constraint Conditions on the Welding Residual Stress and Hardness of Type 316 Stainless Steel Pipe

Suo Li,Yoshihito Yamaguchi,Jinya Katsuyama,Yinsheng Li

DOI: https://doi.org/10.1115/pvp2024-122731

2024-01-01

Abstract:Abstract Flaws due to stress corrosion cracking (SCC) were recently detected in welded joints of austenitic stainless steel piping lines in pressurized water reactors. Welding-induced high hardness and tensile residual stress are known as one of the main factors affecting SCC. In this work, thermal-elastic-plastic coupled three-dimensional finite element analyses were performed to investigate the distributions of welding residual stress and hardness in butt-welded joints of Type 316 stainless steel. Different heat inputs were applied to the pipe welds, including normal heat input, high heat input and very high heat input. Two different axial constraints were considered for the welded joints, i.e., both ends free or clamped. Simulation results were compared with experimental data such as welding thermal cycle, axial shrinkage, and residual stress for validation. The effects of heat input and constraint condition on the welding residual stress and hardness were discussed in detail. The predicted results show that there are high hoop residual stress and high hardness in the 13-pass welded joint with normal heat inputs, and high axial residual stress in the 4-pass welded joint with very high heat inputs. The axial welding residual stress and hardness can be reduced by mitigating the axial constraint in the welded joint.