Abstract:Modern civilization and cutting-edge technologies and tools are highly dependent on energy storage devices and demand efficient and long-lasting high-energy-density storage devices. Lithium metal batteries have surpassed their competitors concerning energy density due to their inherent high specific capacity (3860 mAh/g) and the lowest electrochemical potential (-3.04 V vs. standard hydrogen electrode), proving to be one of the most favorable energy storage devices for smart and mobile gadgets, electric automobiles, grid storage, etc. However, safety-threatening and performance-decay challenges associated with lithium metal anodes, such as lithium dendrite formation, uncontrolled parasitic reactions between Li-metal and electrolyte, low coulombic efficiency, dead Li-formation, etc., restrict its employment in practical batteries. The root cause of the dendrite formation is poor Li-ion conductivity of bulk lithium metal, which results in an uneven electric field distribution, leading to non-uniform Li deposition/stripping upon repeated charge/discharge. Herein, a facile chemical reduction process is being opted to fabricate a highly Li-ion diffusive Li-Sn-based artificial SEI layer on the lithium metal surface to prevail over the above-mentioned issues. Therefore, upon careful concentration investigation of reactants, 25 mM precursor concentration (SnCl 4 in EC: DMC in 1:1 volume ration) demonstrated the best electrochemical performance, revealing a cumulative capacity of over 700 mAh/cm 2 at a current density of 1 mA/cm 2 for 1 h in a symmetric cell. Physical characterizations (XRD and SEM-EDS) showed a thin layer containing Li-Sn alloys along with LiCl formed at the lithium metal surface. Possessing high Li-ion diffusivity, Li-Sn alloyed hybrid anode illustrated a gradual decrease in the charge transfer resistance on increasing the concentration, thus, lower overpotential in symmetric cells, in contrast to pristine Li-metal. However, an increase in the electrical resistance has been observed on increasing the precursor concentration due to the presence of the insulating LiCl phase in the protective layer. Moreover, in-situ optical microscopy demonstrated more uniform and on-surface Li-deposition for the hybrid electrode, whereas mossy and dendritic growth on bare Li-metal. Full cells prepared with Li-Sn alloyed anode against NMC532 cathode illustrated stable cycling up to 150 cycles; contrastingly, the cell with pristine Li-metal showed a drastic capacity fade just after 100 cycles, demonstrating the inclination towards safer lithium metal batteries.

Self-supporting Mg-Sn Alloy Anode for High-Energy Li-ion Batteries

Realizing Ultrathin LiSn Alloy Anode by Tuning the Wettability of Molten Li for High-Energy-Density Batteries

Engineering Wavy‐Nanostructured Anode Interphases with Fast Ion Transfer Kinetics: Toward Practical Li‐Metal Full Batteries

High Performance Hybrid Mg-Li Ion Batteries with Conversion Cathodes for Low Cost Energy Storage

Solid-Solution-Based Li-Mg Alloy for Highly Stable Lithium Metal Anode

Enabling Mg Metal Anodes Rechargeable in Conventional Electrolytes by Fast Ionic Transport Interphase

Mg storage properties and reaction mechanism of PbSn alloy films in Mg ion batteries

Li-Sn Alloyed Layer Containing Artificial SEI on Li-Metal Anode for Superior Lithium Metal Batteries: Development and Understanding of Anode/Electrolyte Interfacial Phenomena

Engineering Stable SEI Film on Mg-Doped Li Metal Anode by Electrolyte Additive with High Donor-Number Anion for Li-S Batteries

Single‐Crystalline LiMg Alloy Anode for Deep Cycling All Solid State Lithium Metal Batteries

Enhancing Magnesium-Ion Storage in a Bi-Sn Anode through Dual-Phase Engineering

A Novel 3D Li/Li9Al4/Li‐Mg Alloy Anode for Superior Lithium Metal Batteries

Three-Dimensional Lithiophilic Li22Sn5 Alloy Skeleton for Dendrite-Free and Ultrahigh-Capacity Li Metal Anode

Stamping Flexible Li Alloy Anodes

Sn buffered by shape memory effect of NiTi alloys as high-performance anodes for lithium ion batteries

Fundamentals, Preparation, and Mechanism Understanding of Li/Na/Mg-Sn Alloy Anodes for Liquid and Solid-State Lithium Batteries and Beyond

A Highly Reversible, Low-Strain Mg-ion Insertion Anode Material for Rechargeable Mg-ion Batteries

Cation-Loaded Porous Mg2+-Zeolite Layer Direct Dendrite-Free Deposition toward Long-Life Lithium Metal Anodes

Achieving high-energy-density magnesium/sulfur battery via a passivation-free Mg-Li alloy anode

3D artificial electron and ion conductive pathway enabled by MgH2 nanoparticles supported on g-C3N4 towards dendrite-free Li metal anode

Lithium–Magnesium Alloy as a Stable Anode for Lithium–Sulfur Battery