Abstract:Catalytic combustion has been widely applied to remove the trace combustible pollutants. However, the earth-abundant and high-performance nanocatalysts are still the main research focus on promoting catalytic efficiency. Herein, the Cu and Mn mixed oxides supported on TiO2 nanoparticles with various Cu and Mn molar contents synthesized via the flame spray pyrolysis (FSP) technique are utilized in the catalytic oxidation of lean CO and CH4. Initially, the Cu–Mn/TiO2 nanocatalysts are composed of spherical structures with a diameter of about 20 nm, whose specific surface area is between 60 and 90 m2/g. The Cu element is more evenly distributed on the TiO2 surface than the Mn element, owing to the distinctly different ion radii. Both the copper and manganese cations could incorporate into the TiO2 lattice, which generates oxygen vacancies and enhances the diffusion of oxygen ions, causing the transformation of the antanse to rutile phase. When the molar content of the Cu–Mn increases to less than 30 mol %, the temperature of its reduction peak keeps decreasing due to the hydrogen spillover effect. Moreover, the catalytic performances of the Cu–Mn/TiO2 with 12 mol % loading (12CMT) are all optimal during the low-temperature and the high-temperature stages, which are superior to the FSP-made copper manganese or copper titanium oxides. This is attributed to the small crystal particles, highly dispersed active components of CuOx and MnOx, and the higher ratios of Cu1+/Cu and Mn4+–Oads Lewis acid–base pairs. In addition, the strong interaction between Cu–Mn components and rutile phase support can tremendously promote the activity of catalytic combustion. Under the simulated flue gas, the catalytic properties of 12CMT decreases in comparison with those of CO and CH4 mixed gas due to the introduction of CO2. Ultimately, the Cu–Mn/TiO2 samples exhibit the outstanding water resistance, thanks to the hydrophobization of the catalyst surface.This article has not yet been cited by other publications.

Electrochemical Synthesized Copper Mesh Catalysts for Catalytic Combustion: A Comprehensive Study of Mn Doping and Atmospheric Conditions During Calcination

Advantage of Microreactor on the Synthesis of High-Activity Cu-Mn Catalyst by Co-Precipitation

Electrochemical Synthesis of Copper Mesh-Supported Thermo-Catalysts

In-situ Synthesis of Monolithic Cu-Mn-Ce/cordierite Catalysts Towards VOCs Combustion

In-situ fabrication of Cu-Mn-O nanostructure catalysts on Ti mesh and their catalytic property optimization for low-temperature and stable CO oxidation

Facile synthesis of a CuMnO<sub><i>x</i></sub> catalyst based on a mechanochemical redox process for efficient and stable CO oxidation

Copper Doped Manganese Oxides to Produce Enhanced Catalytic Performance for CO Oxidation

Transition Metal Modified Manganese-based Catalysts for Soot Oxidation Promoted by Noncompetitive Adsorption of Oxygen: Experiments and DFT Calculations

One-Step Synthesis of Nanostructured Cu–Mn/TiO 2 via Flame Spray Pyrolysis: Application to Catalytic Combustion of CO and CH 4

Effect of Calcination Temperature on Structural Properties and Catalytic Soot Combustion Activity of MnOx/wire-mesh Monoliths

Studies on Flame-synthesized Low-cost Cu-based Catalysts and the Catalytic Properties

Copper-Containing Mixed Metal Oxides (Al, Fe, Mn) for Application in Three-Way Catalysis

Facile synthesis of homogeneous hollow microsphere Cu-Mn based catalysts for catalytic oxidation of toluene

Role of surface species in CO oxidation over CuO@LaMnO 3 nanocomposites: Effect of calcination temperature

Low-Temperature Catalytic Oxidation of Volatile Organic Compounds (VOCs) using Transition Metal Mixed Oxide Catalysts

Formation of Active Structures in Monolith Copper–Manganese Oxide Catalysts for Air-Heating Devices

Surface Modification of Cobalt‐Manganese Mixed Oxide and Its Application for Low‐Temperature Propane Catalytic Combustion

Engineering an effective MnO2 catalyst from LaMnO3 for catalytic methane combustion

Preparation of Mn-Doped Co3O4 Catalysts by an Eco-Friendly Solid-State Method for Catalytic Combustion of Low-Concentration Methane

Construction of Co/Mn-based nanowires with adjustable surface state for boosting lean methane catalytic oxidation

Electrochemical Synthesized Copper Mesh Catalysts for Methanol Steam Reforming