Abstract:The uncertainty in local structure and time-variable compaction of ballast aggregates poses challenges in selecting suitable stabilization methods and parameters for ballast tracks in practical engineering, often resulting in suboptimal operational outcomes. To address this issue comprehensively, the spatial hybrid model of the double dynamic stabilisers-ballast track (MBD-DEM) is proposed in this paper. Subsequent numerical simulations of stabilisation operations are conducted to elucidate ballast vibration, migration behavior and the evolution of ballast track resistance under varying initial conditions of the ballast bed. Initially, leveraging multibody dynamics theory (MBD) and discrete element method (DEM), a MBD model of double stabilisers and a DEM ballast track model containing 6 sleepers were established respectively. Using the coupling interface, the real-time hybrid calculation of these two models is achieved through 6 sleepers in the middle of the ballast bed. Subsequently, the model's accuracy was validated by comparing test data from stabilisation vehicle operations on a Kunming Railway Bureau test line with simulation data from the dynamic double stabilisers-ballast track spatial hybrid model. Finally, utilizing the proposed hybrid model, the dynamic behavior, contact states, and movement rules of ballast particles during stabilisation operations on both loose and initially stable ballast beds (LBB and ISBB) were investigated at the mesoscopic scale. Concurrently, an in-depth analysis of lateral resistance changes in the ballast bed before and after the stabilisation operation is presented. The relevant findings effectively unveil the evolution of dynamic behavior in the ballast bed during stabilisation operations, concluding with practical suggestions for on-site operations. Simulation results illustrate that the rotation of ballast particles in the XY plane beneath each sleeper is predominantly characterized by harmonic rotation. With an increase in the depth of the ballast bed, the range of the rotation axis for combined angular velocity diminishes, leading to the phenomenon of rotation axis deflection. To ensure operational safety and efficiency, a minimum of two-times stabilization operations is recommended for loose ballast beds (LBB), with three-times operations considered optimal. For initially stable ballast beds (ISBB), one-time stabilization operation is basically sufficient.

Numerical Investigation on Compaction Operations of Railway Gravel Ballast Based on DEM-MBD Coupling Method

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Study on the Effects of Tamping Frequency to the Compaction Degree of Trackbeds

Mechanical behavior and performance evolution of railway ballast track under dynamic stabiliser based on the hybrid MBD-DEM simulation

Effect of ballast pockets and geogrid reinforcement on ballasted track: numerical analysis

An intelligent optimization method for stabilizing parameters in the maintenance of ballast particles

MECHANICAL BEHAVIOR OF REINFORCED EMBANKMENT CONSIDERING INTERACTION BETWEEN GRAVEL AND GEOCELL

Investigating the impact of tamping on ballast bed in railway turnout areas: Insights from discrete element method analysis of energy evolution

Macro–meso mechanical properties of ballast bed during three-sleeper tamping operation

Behavior of Geogrid-Reinforced Railway Ballast Under Train Traffic Loads

Evaluation of Ballast Behavior under Different Tie Support Conditions using Discrete Element Modeling

Experimental Study on the Compaction Characteristics and Evaluation Method of Coarse-Grained Materials for Subgrade

Experimental study and numerical simulation of the impact of under-sleeper pads on the dynamic and static mechanical behavior of heavy-haul railway ballast track

Performance of Ballast Influenced by Deformation and Degradation: Laboratory Testing and Numerical Modeling

Micromechanical Particle Interactions in Railway Ballast Through DEM Simulations of Direct Shear Tests

Coupled discrete-continuum approach for railway ballast track and subgrade macro-meso analysis

Calibration for discrete element modelling of railway ballast: A review

Research on the mechanism of railway ballast shear performance under various sand contents and load conditions

Comparison of Laboratory Testing Using SmartRock and Discrete Element Modeling of Ballast Particle Movement

Mesoscale Mechanism of Asphalt Track Bed in Reducing Cyclic Settlement of Ballast Layer under High-Speed Train Traffic Loads

Macro-meso dynamic analysis of railway transition zone: Hybrid DEM/FDM simulation and experimental validation