Abstract:The uncertainty in local structure and time-variable compaction of ballast aggregates poses challenges in selecting suitable stabilization methods and parameters for ballast tracks in practical engineering, often resulting in suboptimal operational outcomes. To address this issue comprehensively, the spatial hybrid model of the double dynamic stabilisers-ballast track (MBD-DEM) is proposed in this paper. Subsequent numerical simulations of stabilisation operations are conducted to elucidate ballast vibration, migration behavior and the evolution of ballast track resistance under varying initial conditions of the ballast bed. Initially, leveraging multibody dynamics theory (MBD) and discrete element method (DEM), a MBD model of double stabilisers and a DEM ballast track model containing 6 sleepers were established respectively. Using the coupling interface, the real-time hybrid calculation of these two models is achieved through 6 sleepers in the middle of the ballast bed. Subsequently, the model's accuracy was validated by comparing test data from stabilisation vehicle operations on a Kunming Railway Bureau test line with simulation data from the dynamic double stabilisers-ballast track spatial hybrid model. Finally, utilizing the proposed hybrid model, the dynamic behavior, contact states, and movement rules of ballast particles during stabilisation operations on both loose and initially stable ballast beds (LBB and ISBB) were investigated at the mesoscopic scale. Concurrently, an in-depth analysis of lateral resistance changes in the ballast bed before and after the stabilisation operation is presented. The relevant findings effectively unveil the evolution of dynamic behavior in the ballast bed during stabilisation operations, concluding with practical suggestions for on-site operations. Simulation results illustrate that the rotation of ballast particles in the XY plane beneath each sleeper is predominantly characterized by harmonic rotation. With an increase in the depth of the ballast bed, the range of the rotation axis for combined angular velocity diminishes, leading to the phenomenon of rotation axis deflection. To ensure operational safety and efficiency, a minimum of two-times stabilization operations is recommended for loose ballast beds (LBB), with three-times operations considered optimal. For initially stable ballast beds (ISBB), one-time stabilization operation is basically sufficient.

An intelligent optimization method for stabilizing parameters in the maintenance of ballast particles

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Mechanical behavior and performance evolution of railway ballast track under dynamic stabiliser based on the hybrid MBD-DEM simulation

Dynamic stability model and analysis of mechanical properties for railway operations

Vibration Characteristics and Mesoscopic State Evolution of Ballasted Track During Dynamic Stabilizing Operation

Surrogate model-based multi-objective optimization algorithm for train-ballast turnout system: Balancing safety and vibration damping in parameter design

Numerical Investigation on Compaction Operations of Railway Gravel Ballast Based on DEM-MBD Coupling Method

Dynamic Behavior Modeling of Full-Scale High-Speed Ballasted Track Using Discrete Element Method

Study on the Effects of Tamping Frequency to the Compaction Degree of Trackbeds

Suspension parameter optimal design to enhance stability and wheel wear in high-speed trains

Study of Problems Related to Laying Ballastless Track in the Turnout of Ballasted Track at High-Speed Railway Stations

Experimental study and numerical simulation of the impact of under-sleeper pads on the dynamic and static mechanical behavior of heavy-haul railway ballast track

Investigating the impact of tamping on ballast bed in railway turnout areas: Insights from discrete element method analysis of energy evolution

Optimization on the Crosswind Stability of Trains Using Neural Network Surrogate Model

Ballasted track aerodynamic optimization by wind tunnel test and CFD simulation

Macro–meso mechanical properties of ballast bed during three-sleeper tamping operation

Micro-Analysis of Hanging Sleeper Dynamic Interactions with Ballast Bed

Particle Motion and Stress Response Interacted with Machine Activity: Railroad Tamping Strategy

Research on parameter optimization based on multi-body dynamics model of monorail vehicle aiming at reducing running wheel wear

Optimization of the Lateral Stability of Rail Vehicles

Suspension parameters optimum of high-speed train bogie for hunting stability robustness