Abstract:The new type of micro-pattern gaseous detector (MPGD) like the gas electron multiplier (GEM), features the advantage of good spatial resolution (sigma < 100 mu m). However, abundant and high density electronic channels are needed to obtain the high spatial resolution, which will lead to a great pressure on the detector construction, power consumption, spatial utilization, etc. The resistive anode readout method can help to obtain a good spatial resolution comparable to the pixel readout structure with an enormous reduction of the electronic channels. By using the thick film resistor technology, a new type of resistive structure, composed of high resistive square pad array with low resistive narrow border strips, is developed and applied to the readout anode of the triple GEM detector. For the resistive anode readout board used in the experiment, there are 6 x 6 resistive cells, which means that the detector needs only 49 electronics channels. To obtain a good spatial resolution, the cell size is set to be 6 mm x 6 mm. The surface resistivity of the pads and the strips are 150 k Omega/square and 1 k Omega/square, respectively. The performances of the detector, especially the two-dimensional imaging performance, are studied by using a Fe-55 (5.9 keV) source and an X ray tube (8 keV). The test results show that the spatial resolution of the detector is better than 80 mu m (sigma) by using the imaging of a 40 mu m wide slot, and the nonlinearity is better than 1.5% by the scanning along the x-axis of the readout board in the steps of 1 mm. Furthermore, quite a good two-dimensional imaging capability is achieved by the detector. These good performances of the detector show the feasibility of the resistive anode readout method for the GEM detector with large area and other detectors with similar structures in the two-dimensional imaging applications.

TMM: Triple Micro-Mesh Gaseous Structure with Ultralow Ion Backflow for Gaseous Photon Detectors

Study on the double micro-mesh gaseous structure (DMM) as a photon detector

A High-Gain, Low Ion-Backflow Double Micro-Mesh Gaseous Structure for Single Electron Detection

Optimization of the double micro-mesh gaseous structure (DMM) for low ion-backflow applications

A novel fast timing detector based on the double micro-mesh gaseous structure with reflective photocathode

Hybrid multi micropattern gaseous photomultiplier for detection of liquid-xenon scintillation

A thermal bonding method for manufacturing Micromegas detectors

On the operation of a Micropattern Gaseous UV-Photomultiplier in Liquid-Xenon

On Dark Matter Detector Concepts with Large-Area Cryogenic Gaseous Photo Multipliers

A UV Sensitive Integrated Micromegas with Timepix Readout

Study of MicroMegas-based Detector with ICCD Imaging

Investigation of a hybrid structure gaseous detector for ion backflow suppression suppression

A High Compression Ratio Channel Multiplexing Method for Micro-pattern Gaseous Detectors

Study of the two dimensional imaging performance for the gas electron multiplier using the resistive anode readout method

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

Thick GEM-like multipliers - a simple solution for large area UV-RICH detectors

An Ultra-Low Background Alpha Detection System with a Micromegas-based Time Projection Chamber

Position Sensitive Gaseous Photomultipliers

A Successful Application of Thinner-Thgems

A High Spatial Resolution Muon Tomography Prototype System Based on Micromegas Detector

Experimental Studies of Micromegas Detectors with Different Micro-Meshes