Abstract:To solve critical issues of premature failure for copper tungsten (CuW) based electrical contacts during arc erosion at the moment of arc breakdown, we proposed a new strategy of using metal doped reduced graphene oxides (rGOs) and in-situ formed tungsten carbides to inhibit movements of cathode spots during the arc ablation process. CuW composites were reinforced with Cu modified rGO nanopowders (i.e. Cu@rGO) using combined processes of chemical co-reduction, ball milling and spark plasms sintering (SPS). Effects of Cu@rGO addition on microstructure, arc erosion resistance and arc ablation resistance of the CuW composites were systematically investigated. Results showed that tungsten carbides with irregular shapes were formed through in-situ reactions of rGO and tungsten during the SPS process. Arc erosion resistance of CuW composites was significantly improved owing to introduction of nanostructured Cu@rGO. Compared with those of CuW composites, the ablation areas of Cu@rGO/CuW ones were much smaller and the ablation craters were shallower, and the average strengths of dielectric vacuum breakdowns of the CuW composites with 3 wt% Cu@rGO were increased by 28.9%. The arc breakdown mechanisms of Cu@rGO/CuW composites were identified as: (1) The nano -structured Cu@rGO increases the viscosity of molten metal Cu, thus inhibiting its fast flow and splashing; (2) Lower work functions of carbon (i.e. rGO) and tungsten carbide restrain the electron emissions during arc breakdown; and (3) The tungsten carbides with their good stability and high melting point shorten the solidi-fication time of molten copper liquid and extend the service life time of the Cu@rGO/CuW composites.

Unraveling the New Role of La on Arc Erosion Behavior of C/Cu-based Electrical Contacts

Effect of La on Arc Erosion Behaviors and Oxidation Resistance of Cu Alloys

Preparation, electrical contact performance and arc-erosion behavior of Cu/La2NiO4 composites

Anti-Arc Erosion Properties of Ag-La2Sn2O7/SnO2 Contacts

Improvement of the High Temperature Oxidation Resistance and Anti-Arc Erosion of Pure Cu with the Addition of La and Graphite

Progress in Cu-based Contact Materials of Low Voltage Apparatus

Effects of Interfacial Wettability on Arc Erosion Behavior of Zn2SnO4/Cu Electrical Contacts

Air Arc Erosion Behavior of CuZr/Zn2SnO4 Electrical Contact Materials

Enhancing Mechanisms of Arc-Erosion Resistance for Copper Tungsten Electrical Contact Using Reduced Graphene Oxides in Situ Modified by Copper Nanoparticles

The Contact Resistance And Arc Erosion Behavior Of Separable Cp-Nb-Cr/Cu-Cd Electrical Contact Material

Resistance to Electrical Corrosion of Au-Cu Alloy Coatings for Electronic Contacts

Arc Erosion Properties of Cu-La2Sn2O7 Composite under Different DC Voltage

Comparisons on Arc Behavior and Contact Performance Between Cu and Cu-Mo Alloys in a Bridge-Type Contact System.

Arc Erosion and Morphological Characters of Ag/LSCO(12) Contacts by Different Methods

Influence of Interface Oxidation on the Electrical Contact Properties of C-Cu Contact Pairs

Preparation and Arc Erosion Mechanism of Ni Skeleton Reinforced Ag-Based Contact Materials with CuO-Coated SnO2

Microstructure and arc erosion behaviors of Ag-CuO contact material prepared by selective laser melting

Study on the Erosion Characteristics of Copper‐carbon Electrode Pairs by DC Air Arc

Metallic Electrical Contact Materials: DFT Calculations, Wetting Mechanism and Arc Resistance

Improving Interfacial Wettability, Physical, and Mechanical Properties of Ag/La 1− X Sr X CoO 3 Electrical Contact Materials by in Situ Cu-Doping

Microstructure Analysis And The Effect Of Cr Additive On Electrical Performance Of (C-P-Nb)/Cu-Cd Electrical Contact Materials