Abstract:In order to evaluate the safety margin during a postulated severe accident, a module named ASAP-2D (Accident Simulation on Pressure vessel-2 Dimensional), which can be implemented into the severe accident simulation codes (such as ATHLET-CD), is developed in Shanghai Jiao Tong University. Based on two-dimensional spherical coordinates, heat conduction equation for transient state is solved implicitly. Together with solid vessel thickness, heat flux distribution and heat transfer coefficient at outer vessel surface are obtained. Heat transfer regime when critical heat flux has been exceeded (POST-CHF regime) could be simulated in the code, and the transition behavior of boiling crisis (from spatial and temporal points of view) can be predicted.The module is verified against a one-dimensional analytical solution with uniform heat flux distribution, and afterwards this module is applied to the benchmark illustrated in NUREG/CR-6849. Benchmark calculation indicates that maximum heat flux at outer surface of RPV could be around 20% lower than that of at inner surface due to two-dimensional heat conduction. Then a preliminary analysis is performed on the integrity of the reactor vessel for which the geometric parameters and boundary conditions are derived from a large scale advanced pressurized water reactor. Results indicate that heat flux remains lower than critical heat flux. Sensitivity analysis indicates that outer heat flux distribution is more sensitive to input heat flux distribution and the transition boiling correlation than mass flow rate in external reactor vessel cooling (ERVC) channel, and the correlation for molten vessel and ERVC coolant inlet temperature.According to the results achieved, the new developed module shows good applicability to simulate the pressure vessel behavior during melt pool formation. Thus it can be applied for the future study of the severe accidents relating to lower head integrity. (C) 2015 The Authors. Published by Elsevier Ltd.

Thermal-Hydraulic Analysis of the Upper Plenum in a Typical LFR During a Reactivity Insertion Accident

Multi-scale coupling analysis of the flow blockage accident in the typical LFR

Numerical Study on the Thermal Stratification Characteristics in the Upper Plenum of Sodium-Cooled Fast Reactor (SFR)

Fluid-structure Interaction Analysis of a Hypothetical Core Disruptive Accident in LMFBRs

Transient Simulation on Reactor Core Melt and Lower Support Plate Ablation in In-Vessel Retention

Thermal-hydraulic Analysis of a Full-Scale Lead-Bismuth Cooled Fast Reactor Core Considering Inter-Wrapper Flow

CFD Investigation on Thermal Hydraulics of the Passive Residual Heat Removal Heat Exchanger (PRHR HX)

Early Mitigation Measures for High Flux Reactor Loss-of-Coolant Accidents

Analysis of Thermal Stratification Effects in the Ring Headers of the Passive Residual Heat Removal System of NHR-200-II

Analysis of Safety Margin of In-Vessel Retention for AP1000

Thermal-hydraulic analysis of EBR-II Shutdown Heat Removal Tests SHRT-17 and SHRT-45R

Validation of a Methodology for Thermal Stratification Analysis in Sodium-Cooled Fast Reactors

Development and Application of Multi-Physics Safety Analysis Code for Advanced Liquid Metal Cooled Reactor

A Two Dimensional Approach for Temperature Distribution in Reactor Lower Head During Severe Accident

CFD Simulation of Thermal Hydraulic Characteristics in a Typical Upper Plenum of RPV

Preliminary Investigation of THFR Passive Residual Heat Removal System

Numerical Analysis of Thermal-Hydraulic Characteristics of the Whole Lfr Core under Blockage Conditions

Transient Heat Transfer Analysis of Double-Layer Molten Pool under Severe Accident

Thermal Hydraulics Analysis of the Fluoride-Salt-Cooled, High-Temperature Reactor

Transient Thermal-Hydraulic Evaluation of Lead-Bismuth Fast Reactor by Coupling Sub-Channel and System Analysis Codes

RELAP5 MOD3.2 Modification and Application to the Transient Analysis of a Fluoride-Salt-cooled High-Temperature Reactor