Abstract:Lightweight and open-cell thermoplastic foams have proven superior to common counterparts in terms of functional performances, such as oil absorption, sound and thermal insulation, contributing to energy saving, environmental protection, and sustainable development of the economy and society. Herein, a novel strategy was employed to prepare lightweight, oleophilic, and sound-insulating polypropylene (PP)/polytetrafluoroethylene (PTFE) composite foams by combining the microcellular injection molding (MIM) and in-situ fibrillation technologies. Thanks to the pronouncedly promoted crystallization and melt strength of the PP matrix by the nanofibrillar PTFE fibrils obtained by the in-situ fibrillation process, the foaming ability of PP in the MIM process was effectively improved, reaching an expansion ratio of up to 20.2 and a cell population density of 10(8) cells/cm(3). Notably, the nano-scale structures on cell walls together with thin cell-wall thickness of the PP/PTFE foam, significantly increased the open-cell content to 98.3%. The high porosities and large expansion ratios, assisted by the capillary penetration action caused by the uniquely elongated cells, effectively increased the oil absorption capacity up to 22.5 g/g with a high recovery of 97.4%, particularly for raw crude oil. Moreover, a high porosity and low airflow resistivity dramatically improved the sound insulation by reducing impedance and enhancing viscous dissipation, presenting as a sound absorption coefficient of higher than 0.5, and a transmission loss of up to 50 dB. Hence, the flexible, scalable and cost-effective MIM technology shows a promising future in the manufacture of multifunctional microcellular polymer products.

Tough and Defect-Free-surfaces PA66/PTFE Composite Foam with Bimodal Structure Achieved by High-Pressure Foam Injection Molding with Mold-Opening

Development of High Thermal Insulation and Compressive Strength BPP Foams Using Mold-Opening Foam Injection Molding with In-Situ Fibrillated PTFE Fibers

High-strength, impact-resistant PP/PTFE composite foam with enhanced surface appearance achieved through mold-opening microcellular injection molding

Lightweight and Strong Pp/Talc/Ptfe Foams with Enhanced Flame-Resistant Performance Fabricated by Microcellular Foam Injection Foaming

Lightweight and strong polypropylene/talc/polytetrafluoroethylene foams with enhanced flame-retardant performance fabricated by microcellular foam injection foaming

Mold-opening foam injection molded strong PP/CF foams with high EMI shielding performance

Microcellular injection molding of foamed engineering plastic parts with high dimensional accuracy

Microcellular injection molded outstanding oleophilic and sound-insulating PP/PTFE nanocomposite foam

Tailored Morphologies and Properties of High-Performance Microcellular Poly(phenylene Sulfide)/poly(ether Ether Ketone) (PPS/PEEK) Blends

High Thermal Insulation and Compressive Strength Polypropylene Foams Fabricated by High-Pressure Foam Injection Molding and Mold Opening of Nano-Fibrillar Composites

Real-microcellular poly(ether-block-amide)/carbon fiber foams with improved mechanical property and surface quality for high-performance electromagnetic interference shielding applications

Development of in-situ nanofibrillated poly(butylene succinate)/polytetrafluoroethylene composites with elevated rheology, crystallization, and foaming performance

Effects of Process Conditions and Nano-Fillers on the Cell Structure and Mechanical Properties of Co-Injection Molded Polypropylene-Polyethylene Composites

Bio-based PA56 modified by PA66 and its supercritical CO2 foaming behaviour

Fabrication of lightweight polyethersulfone foams with enhanced surface quality and high specific flexural properties using micro‐opening microcellular injection molding

Lightweight and High Impact Toughness PP/PET/POE Composite Foams Fabricated by In Situ Nanofibrillation and Microcellular Injection Molding

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement

Simultaneous Enhancement of the Conductivity and Toughness for Polyamide 66 Nanocomposites by Regulating the Hydrogen Bond and Introducing Microcellular Structures

Preparation and characterization of microcellular injection molded foams from high-performance blends based on PPS-modified PPBESK

Fabrication of Polyether–Ether–Ketone Foams with Superior Properties and Mitigated Weld Lines by Microcellular Injection Molding

Conventional and Microcellular Injection Molding of a Highly Filled Polycarbonate Composite with Glass Fibers and Carbon Black