Abstract:Iron-based superconductors, characterized by a high upper critical field and small anisotropy, have been regarded as prospective candidate material for high magnetic field applications. For such applications, it is essential to develop iron-based superconducting wires and tapes with high in-field critical current density (Jc). In view of material microstructure, large-sized superconducting grains with high-degree of grain texture are preferable for high efficiency current transportation, but on the other hand will sacrifice some grain boundaries that act as potential flux pinning centers. Here, based on powder-in-tube method, a novel approach combining medium temperature pressing and hot isostatic pressing was developed for the fabrication of Cu/Ag composite sheathed (Ba, K)Fe2As2 (Ba-122) iron-based superconducting tapes. Microstructural analysis reveals lager grain size and improved grain texture produced by the combined processes, and at the same time, high-density nano-size dislocations were induced in grains, which further enhanced the current carrying ability at high field region. As a result, high transport Jc of 1.6×105A /cm2 at 4.2K and 10T was obtained for the Ba-122 tapes, and more importantly, due to the significantly reduced field dependence of Jc, the transport Jc was still kept above the practical level of 105A /cm2 at high fields up to 25T. At 25T, the value of Jc exceeds 60% of its value at 10T, indicating a minimal reduction in iron-based superconducting wires and tapes. This study demonstrates a favorable microstructure that will help to approach superior current transport performance under high magnetic fields for iron-based superconductors.

Investigation of the Energizing Characteristics of a Metal-Insulation Iron-Based Superconducting Coil

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Development of Metal-Insulated Iron-Based Superconducting Coils and Charging Tests under High Magnetic Fields Up to 32 T

Development of the Iron-Based Superconducting Coils for High Magnetic Field Application

Fabrication and Test of Diameter 35 Mm Iron-Based Superconductor Coils

Progress in the research of iron-based superconducting wires & tapes

Superconducting Properties of 100-M Class Sr0.6K0.4Fe2As2 Tape and Pancake Coils

Fabrication and Transport Properties of 100 m Class Sr0.6K0.4Fe2As2 Wires and Pancake Coils

Development of high-performance iron-based superconducting wires and tapes

Performance testing of the iron-based superconductor inserted coils under high magnetic field

Iron-Based Superconductors for High-Field Applications: Realization of High Engineering Critical Current Density

First Performance Test of FeSe0.5Te0.5 Coated Conductor Coil under High Magnetic Fields

Iron-based superconducting materials for high-field applications

First Performance Test of a 30 Mm Iron-Based Superconductor Single Pancake Coil under a 24 T Background Field

High critical current density in low-cost iron-based superconducting round wires annealed at ambient pressure

Study on Non-insulated Superconducting Magnet Coils and Performance Testing

Transport Critical Currents in the Iron Pnictide Superconducting Wires Prepared by the Ex Situ Pit Method

Development of the first Tesla class iron-based superconducting coil for high field application

Progress in wire fabrication of iron-based superconductors

Superior Transport Current Densities in (ba, K)Fe2As2 Superconducting Tapes Realized by Combined Strengthening of Grain Texture and Flux Pinning

Recent Breakthrough Development in Iron-Based Superconducting Wires for Practical Applications