Abstract:The superconducting magnet group at IHEP (the Institute of High Energy Physics, Chinese Academy of Sciences, China) has been engaging in the R&D of high field accelerator magnets since 2014 for the pre-study of the next-generation high energy particle accelerators like CEPC-SPPC (Circular Electron Positron Collider-Super Proton Proton Collider), FCC (Future Circular Collider), etc. A superconducting model dipole magnet named LPF1 was first fabricated with NbTi and Nb 3 Sn in a combined common-coil configuration in 2017 and tested in 2018, a main field of 10.23 T was reached within two 10 mm apertures. The magnet was reassembled with higher pre-stress in 2019 to investigate the influence of the pre-stress loading level on the performance of common-coil dipole magnets. The main field of this upgraded magnet named LPF1-S was increased to 10.71 T within two 12 mm apertures. By improving the key processing technologies in Rutherford cable fabrication, coil winding, Nb 3 Sn & NbTi splices soldering and coil impregnation, the recently fabricated model dipole magnet named LPF1-U attained a 12.47 T main field in two 14 mm apertures in 2021. To fully take advantage of Nb 3 Sn and NbTi superconductors in different field regions, LPF1-U was still designed and developed with a combined coil configuration with Nb 3 Sn for the inner two coils and NbTi for the outer four coils. Additionally, graded coil topology and different coil LSS (length of straight section) settings were adopted in the optimization of LPF1-U layouts. Bladder and key technology was used for the support structure, and fiber optic sensors based on FBG (fiber Bragg grating) were utilized to monitor the stress distribution and variation in the structures and coils through the whole process from magnet assembly to cool-down and excitation. During the performance test, a relatively large number of trainings were carried out and LPF1-U became more stable after the thermal cycle. A peak field of 12.7 T in the coils (12.47 T main field in apertures) corresponds to an operating current of 6865 A and a load line ratio of 90% was finally attained. It is worth mentioning that LPF1-U is the first hybrid—Nb 3 Sn, NbTi—common coil dipole magnet that has achieved a main field of more than 12 T in two apertures. The design, fabrication and performance analysis of the LPF series dipole magnets are presented in this paper.

Development of the first Tesla class iron-based superconducting coil for high field application

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Development of High Magnetic Field Magnet Technologies for the Magnetic Resonance Medical Imaging

Development of a Conduction-Cooled HTS SMES

Development of YBCO Insert for a 25 T All Superconducting Magnet

The first CICC-type Bi-2212 insert coil for high-field applications up to 20 T

Design and Preliminary Tests of a 20-T REBCO Insert Coil for a 35-T All Superconducting Magnet

Progress in the Construction of a 20 T REBCO Insert Coil for High-Field All-Superconducting Magnets

33.8 TESLA WITH A YBa2Cu3O7−xSUPERCONDUCTING TEST COIL

Development of Electromagnetic Forming Nbti Superconducting Joint

High Transport Current Superconductivity in Powder-in-tube Ba0.6K0.4Fe2As2 Tapes at 27T

First performance test of a 25 T cryogen-free superconducting magnet

Development of high-performance iron-based superconducting wires and tapes

World record 32.35 tesla direct-current magnetic field generated with an all-superconducting magnet

Design and Performance of the First Dual-Coil Magnet at the Wuhan National High Magnetic Field Center

Iron-Based Superconductors for High-Field Applications: Realization of High Engineering Critical Current Density

Development of Superconducting Model Dipole Magnets Beyond 12 T with a Combined Common-Coil Configuration

Design and Development of Turn Insulation Automatic Wrapping System for CRAFT TF

Design of a 20 T Class REBCO Insert in a 15 T Low Temperature Superconducting Magnet

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Mechanical Design, Assembly and Strain Measurement Results of a 13-T Superconducting Dipole Magnet