Abstract:Argyrodite-based solid-state lithium metal batteries exhibit significant potential as next-generation energy storage devices. However, their practical applications are constrained by the intrinsic poor stability of argyrodite towards Li metal and exposure to air/moisture. Therefore, an indium-involved modification strategy is employed to address these issues. The optimized doping yields a high Li-ion conductivity of 7.5 mS cm −1 for Li 5.54 In 0.02 PS 4.47 O 0.03 Cl 1.5 electrolyte, accompanied by enhanced endurance against air/moisture and bare Li metal. It retains 92.0% of its original conductivity after exposure to air at a low dew point of −60 °C in dry room. Additionally, a composite layer comprising Li–In alloy and LiF phases is generated on the surface of lithium metal anode via the reaction between InF 3 and molten Li. This layer effectively mitigates Li dendrite growth by creating a physical barrier from the robust LiF phase, while the Li–In alloy induces uniform Li-ion deposition and accelerates Li transport dynamics across the interphase between the solid electrolyte/Li metal. Moreover, the In-doped electrolyte facilitates the in-situ generation of Li–In alloy within its voids, reducing local current density and further inhibiting lithium dendrite growth. Consequently, the combination of the Li 5.54 In 0.02 PS 4.47 O 0.03 Cl 1.5 electrolyte and the InF 3 @Li anode provides exceptional electrochemical performances in both symmetric cells and solid-state lithium metal batteries across different operating temperatures. Specifically, the LiNbO 3 @LiNi 0.7 Co 0.2 Mn 0.1 O 2 /Li 5.54 In 0.02 PS 4.47 O 0.03 Cl 1.5 /InF 3 @Li cell delivers a high discharge capacity of 167.8 mAh g −1 at 0.5 C under 25 °C and retains 80.0% of its initial value after 400 cycles. This work offers a viable strategy for designing functional interfaces with enhanced stability for sulfide-based solid-state lithium batteries.

A Highly Conductive and Antioxidative MoO2-doped Li Argyrodite Electrolyte for All-Solid-state Li Batteries

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

Superionic Lithium Argyrodite Electrolytes by Bromine-Doping for All-Solid-State Lithium Batteries

Synthesis of Br-rich argyrodite electrolytes enables all-solid-state batteries with superior battery performances at different operating temperatures

Tailored Li2s-P2s5 Glass-Ceramic Electrolyte By Mos2 Doping, Possessing High Ionic Conductivity For All-Solid-State Lithium-Sulfur Batteries

Facile Synthesis of Lithium Argyrodite Li5.5PS4.5Br1.5 with High Ionic Conductivity for All-Solid-state Batteries

Enhancing solid-state lithium metal battery performance via indium-based modification of electrolytes and lithium metal surfaces: mechanistic insights and optimization

Enabling ultrafast ionic conductivity in Br-based lithium argyrodite electrolytes for solid-state batteries with different anodes

Enhanced capacity of all-solid-state battery comprising LiNbO3-coated Li(Ni0.8Co0.1Mn0.1)O2 Cathode, Li5.4(PS4)(S0.4Cl1.0Br0.6) solid electrolyte and lithium metal anode

In-situ Coating Strategy to Synthesize Ultra-Soft Sulfide Solid-State Electrolytes for Dendrite-Free Lithium Metal Batteries

Yttrium stabilized argyrodite solid electrolyte with enhanced ionic conductivity and interfacial stability for all-solid-state batteries

Argyrodite-Li 6 PS 5 Cl/Polymer-based Highly Conductive Composite Electrolyte for All-Solid-State Batteries

Ag/Br dual-doped Li6PS5Br electrolyte with superior conductivity for all-solid-state batteries

Argyrodite Solid Electrolyte with a Stable Interface and Superior Dendrite Suppression Capability Realized by ZnO Co-Doping

Synthetic optimization and application of Li-argyrodite Li6PS5I in solid-state battery at different temperatures

In Situ Polymerization Permeated Three-Dimensional Li+-Percolated Porous Oxide Ceramic Framework Boosting All Solid-State Lithium Metal Battery

Interphase Stabilization of LiNi0.5 Mn1.5 O4 Cathode for 5 V-Class All-Solid-State Batteries

A Solid Electrolyte Based on Electrochemical Active Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> with PVDF for Solid State Lithium Metal Battery

A Wide Temperature 10 V Solid-state Electrolyte with a Critical Current Density of over 20 mA cm-2

Sb and O Dual Doping of Chlorine-rich Lithium Argyrodite to Improve Air Stability and Lithium Compatibility for All-Solid-state Batteries

Enhancing Moisture and Electrochemical Stability of the Li5.5PS4.5Cl1.5 Electrolyte by Oxygen Doping.