Abstract:Argyrodite-type sulfide solid electrolytes (SEs) Li6PS5X (X = Cl, Br, I) have attracted considerable interest lately by providing a promising lithium-ion transport capability for its application in all-solid-state lithium batteries (ASSLBs). However, other than Li6PS5Cl and Li6PS5Br, Li6PS5I shows poor ionic conductivity of 10–7 S cm–1, which is originated from the I–/S2– site ordered arrangement in its structure. Herein, we report a silicon-doped solid electrolyte Li6+xP1–xSixS5I in this sulfide class, which can remarkably increase the conductivity to 1.1 × 10–3 S cm–1 and lower the activation energy to 0.19 eV as a consequence of changing the structural unit in the argyrodite network. The Li6+xP1–xSixS5I solid electrolytes are employed in ASSLBs with Li(Ni0.8Mn0.1Co0.1)O2 (NCM-811) as cathode and Li metal as an anode to evaluate the electrochemical performance. With x = 0.55, the battery displays an initial discharge capacity of 105 mA h g–1 at a rate of 0.05C and achieves high Coulombic efficiency. Moreover, chemical reactions occurring on the interfaces of the NCM/SE and Li/SE in regard to the degradation of cell performance are also investigated.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11683?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11683</a>.Morphological characterization of the Li6+xP1–xSixS5I samples; Nyquist plots of Li6+xP1–xSixS5I samples at 30–100 °C; LSV and CV curves of Li6+xP1–xSixS5I samples; and morphological characterization of cathode and Li6.55P0.45Si0.55S5I SE/electrode interfaces before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11683/suppl_file/am0c11683_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced capacity of all-solid-state battery comprising LiNbO3-coated Li(Ni0.8Co0.1Mn0.1)O2 Cathode, Li5.4(PS4)(S0.4Cl1.0Br0.6) solid electrolyte and lithium metal anode

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

Ag-modification argyrodite electrolytes enable high-performance for all-solid-state lithium metal batteries

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

High Lithium-Ion Conductivity, Halide-Coated, Ni-Rich NCM Improves Cycling Stability in Sulfide All-Solid-State Batteries

Dual N-modification enables high-performance Solid-State Li metal batteries with Li5.5PS4.5Cl1.5

Enhancing solid-state lithium metal battery performance via indium-based modification of electrolytes and lithium metal surfaces: mechanistic insights and optimization

Cobalt-free cathodes and silicon thin-film anodes towards high-capacity solid-state batteries

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Understanding the Carbon Additive/Sulfide Solid Electrolyte Interface in Nickel-Rich Cathode Composites and Prioritizing the Corresponding Interplay between the Electrical and Ionic Conductive Networks to Enhance All-Solid-State-Battery Rate Capability

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

Micro-Sized MoS6@15%Li7P3S11 Composite Enables Stable All-Solid-State Battery with High Capacity

A Catalyst SnO2 Improves the Performance of All-Solid-State Batteries with LiNi0.5Mn1.5o4@SnO2 Cathodes, Pmma-Pvdf@ Li1.3ai0.3ti1.7(Po4)3 Composite Solid Electrolyte and Lithium Metal Anodes

Silicon-Doped Argyrodite Solid Electrolyte Li 6 PS 5 I with Improved Ionic Conductivity and Interfacial Compatibility for High-Performance All-Solid-State Lithium Batteries

High‐Performance All‐Solid‐State Batteries Enabled by Intimate Interfacial Contact Between the Cathode and Sulfide‐Based Solid Electrolytes

Silicon-Doped Argyrodite Solid Electrolyte Li6PS5I with Improved Ionic Conductivity and Interfacial Compatibility for High-Performance All-Solid-State Lithium Batteries.

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Stable all-solid-state battery enabled with Li6.25PS5.25Cl0.75 as fast ion-conducting electrolyte

Argyrodite sulfide coated NCM cathode for the improved interfacial contact in normal-pressure operational all-solid-state batteries

S/MWCNt/LLZO composite electrode with e−/S/Li+ conductive network for all-solid -state Lithium–Sulfur batteries