Abstract:Nanoscale [(Ba0.85Ca0.15)(0.995)Nd-0.005](Ti0.9Hf0.1)O-3 (Nd-BCTH) ceramics were prepared via the hydrothermal method, and the effects of sintering temperature and holding time on the phase structure, micro-morphology, electrical and optical properties of the Nd-BCTH ceramics were explored. All the Nd-BCTH ceramics present rather pure perovskite structure with composition approaching rhombohedral phase around the morphotropic phase boundary (MPB) region. The highest relative density is obtained for the sample sintered at 1220 ? for 10 h. The existence of Ba2+, Ca2+, Ti4+, Hf(4+ )and Nd3+ is confirmed and the elements distribute rather uniformly detected by X-ray photoelectron spectrometer (XPS) and energy dispersive X-ray (EDX) analysis. The ceramics present nanoscale grain size, which tends to increase with the increase of sintering temperature and holding time, and significantly affects dielectric constant and Curie temperature. Very thin and narrow ferroelectric hysteresis loops are observed, where a considerable energy storage density (173.88 mJ/cm(3)) and high energy storage efficiency (80.68%) are obtained at low electric field. The increase of sintering temperature and holding time induces a red shift at 400 nm absorption edge and a blue shift at 300 nm absorption edge in the Nd-BCTH ceramics, and all ceramics have a maximum absorption value at around 260 nm. Under the excitation of 269 nm light, the Nd-BCTH ceramics show the strongest fluorescence peak at 473 nm, corresponding to the (4)G(3/2)-> I-4(9/2) transition, emitting indigo blue fluorescence. When the ambient temperature is above 400 ?, grains conduction dominates the conductive mechanism in the nano-sized Nd-BCTH ceramics. Such conduction can be attributed to oxygen vacancies caused due to the evaporation of alkaline-earth metals during high temperature sintering, and show typically thermally excited relaxation process. (C) 2022 Published by Elsevier B.V.

Negative Thermal Expansion Performance of (Namg)xcr2-X(moo4)3 X Cr 2-X (moo 4 ) 3 (0≤x≤1) ≤ X ≤ 1) Ceramics

Negative thermal expansion performance of (NaMg)xCr2-x(MoO4)3 (0≤x≤1) ceramics

Effects of (KMg)3+ co-doping and sintering temperature on the negative thermal expansion property of Sc2W3O12 ceramics

Improving Room Temperature Negative Thermal Expansion Performance of Fe2‐xScx(MoO4)3

Double cation (KMg)3+ co-substitution to regulate negative thermal expansion property of ln2W3O12

Phase transition temperature and negative thermal expansion of Sc-substituted In2(MoO4)3 ceramics

Effects of (KMn)3+ substitution on phase transition and thermal expansion property of Fe2Mo3O12

Zr 1− X Yb X WMoO 8− X /2 ( X = 0, 0.04) Ceramics Fabricated by in Situ Synthesis from Trigonal Polymorph: Preparation, Sintering Process, and Negative Thermal Expansion Properties

Negative Thermal Expansion of Yb2mo3o12 and Lu2mo3o12

Negative thermal expansion property of CuMoO4

Phase transition and thermal expansion in W-substituted In2Mo3O12 ceramics

Oxide ceramics of A 2 M 3 O 12 family with negative and close-to-zero thermal expansion coefficients: Machine learning-based modeling of functional characteristics

Sc- and W-substitution and Tuning of Phase Transition in the Al2Mo3O12

Preparation of Nanoscale [(ba0.85ca0.15)0.995nd0.005](ti0.9hf0.1)o3 Ceramics Via Hydrothermal Method and Effect of Grain Size on Multifunctional Performance

Hydrothermal synthesis of flower-like Sc2Mo3O12 and its investigation into negative thermal expansion property

Controllable Thermal Expansion and Phase Transition in Yb2−xCrxMo3O12

Structure and Negative Thermal Expansion in Zr0.3Sc1.7Mo2.7V0.3O12

High configurational entropy for low phase transition temperature and thermal expansion of A2M3O12 oxide ceramics

Crystallographic and thermal expansion properties of rare earth solid solution Er2-xRxMo4O15

Synthesis and high thermal stability of Mn doped Y2/3Cu3Ti4O12 negative temperature coefficient ceramic

Negative Thermal Expansion in ABC(MoO4)3 Compounds