Abstract:Recycled concrete, which is formed by replacing coarse aggregates in ordinary concrete with recycled aggregates (RA), is of great significance for the secondary utilization of waste building resources. In civil engineering, concrete structures are sometimes subjected to a compression-shear multiaxial stress state. Therefore, research on the compression-shear multiaxial mechanical properties of recycled concrete plays an important role in engineering practice. To explore the effect of RA replacement rate on the compression-shear properties of recycled concrete, an experimental study was carried out using a compression-shear testing machine and considering five RA replacement rates and five axial compression ratios. Consequently, the failure modes and mechanical property parameters under different working conditions were obtained and were used to analyze the effects of RA replacement rate and axial compression ratio on the shear stress of recycled concrete. Eventually, the following conclusions were reached: With the growth of axial compression ratio, the shear cracks exhibit a developing trend along the oblique direction, and the friction traces on the shear surface are gradually deepened. As the replacement rate increases, the number of shear cracks is gradually increased, accompanied by increasing broken fragments falling off from the shear interface. Since the action of the axial compression ratio can effectively improve the mechanical bite force and friction on the shear interface of recycled concrete, as the axial compression ratio increases, the shear stress is gradually increased. On the other hand, due to the initial damage of RA and its weak adhesion with cement mortar, the shear stress is gradually reduced with the increase of RA replacement rate. Meanwhile, the increase in shear stress shows a gradually decreasing trend with the growth of axial compression ratio. Specifically, for the RA replacement rates of 0% and 100%, the shear stress increased by 4.06 times and 3.21 times, respectively, under the influence of the axial compression ratio. Under different axial compression ratios, the shear stress was reduced by 43~46%, due to the increase of RA replacement rate. In addition, based on the octahedral stress space and the principal stress space, a compression-shear multiaxial failure criterion and shear stress calculation model for recycled concrete were proposed, by considering the effect of the RA replacement rate. The outcomes of this research are of great significance for engineering applications and the development of recycled concrete.

Effect of Sulfate Freeze-Thaw on the Stress-Strain Relationship of Recycled Coarse Aggregate Self-Compacting Concrete: Experimental and Machine Learning Algorithms

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

High-strain Rate Compressive Behavior of Concrete Made with Substituted Coarse Aggregates: Recycled Crushed Concrete and Clay Bricks

RBSM-based Mesoscale Study of Frost Deterioration for Recycled Concrete Considering Air-Entrainment in Old and New Mortar

Study on the sulfate freeze thaw resistance of recycled coarse aggregate self-compacting concrete

A methodology for stress-strain behavior characterization and mixture optimization of recycled aggregate concrete based on machine learning

Study on stress–strain relationship and constitutive model of recycled aggregate concrete under axial cyclic compression

Macro-mechanical properties and fine scale damage mechanism of carbon fiber-modified recycled coarse aggregate concrete under sodium sulfate-dry-wet and freeze-thaw cycling coupling effects

Cyclic Stress-Strain Model for Air-Entrained Recycled Aggregate Concrete after Freezing-and-Thawing Cycles

The effectiveness of surrogate models in predicting the long-term behavior of varying compressive strength ranges of recycled concrete aggregate for a variety of shapes and sizes of specimens

Coupled Effects of the Freeze-Thaw Cycles and Salt Erosion on the Performance of Recycled Aggregate Concrete

Cyclic Behavior and Stress–Strain Model of Nano-SiO2-Modified Recycled Aggregate Concrete

Estimation on compressive strength of recycled aggregate self-compacting concrete using interpretable machine learning-based models

Prediction of the Elastic Modulus and the Splitting Tensile Strength of Concrete Incorporating Both Fine and Coarse Recycled Aggregate

Prediction of thermo-mechanical properties of rubber-modified recycled aggregate concrete

Comparison of Prediction Models Based on Machine Learning for the Compressive Strength Estimation of Recycled Aggregate Concrete

Salt frost damage evolution and transport properties of recycled aggregate concrete under sustained compressive loading

Machine Learning Models for the Prediction of the Compressive Strength of Self-Compacting Concrete Incorporating Incinerated Bio-Medical Waste Ash

A Machine Learning Approach to Predict Relative Residual Strengths of Recycled Aggregate Concrete after Exposure to High Temperatures

Machine Learning Prediction Models to Evaluate the Strength of Recycled Aggregate Concrete

Experimental Study and Theoretical Analysis on the Compression-Shear Multiaxial Mechanical Properties of Recycled Concrete